SAE P10 Power Amp HELP

darthy · 8th March 2011, 10:19 PM

Power light burned out so I replaced with a 8V 70ma that i found. Light blinks about 3 times when first powered on then ok. Light is not very bright either. Could this be the wrong light? Will it harm anything?

llwhtt · 9th March 2011, 12:32 AM

I have a friends P10 that I'm collecting parts for a complete rebuild, worth it or not. Someone has already replaced the power lamp with some LEDs that are also very dim, will have to work on that once I get it back together. I can't help you on your lamp choice but what I've been searching high and low for is a schematic, do you have a schematic? It's as these Series II components never existed.

Craig

darthy · 9th March 2011, 01:26 AM

Sorry, No repair manual for the SAE TWO P 10 . I really enjoy this amp, it sounds very neutral and works well as a headphone amp too.

Gavrikon · 18th June 2011, 04:05 PM

Does anyone know how to re-solder the power leads so that I use 220 here in Germany. It was originally a 220 model that was converted to 110 while in America.

8th March 2011, 10:19 PM	#1
darthy diyAudio Member Join Date: Aug 2008	SAE P10 Power Amp HELP Power light burned out so I replaced with a 8V 70ma that i found. Light blinks about 3 times when first powered on then ok. Light is not very bright either. Could this be the wrong light? Will it harm anything?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ads p10.2 power palte amp.	abrego54	Car Audio	0	15th August 2010 01:20 AM
SAE A502 power amp idling warm on right side.	ARPVMAC	Solid State	3	4th July 2010 07:43 PM
Tube power Amp matching with SAE Mark M pre amp and AR18 speaker or MS 25i	soultribe	Tubes / Valves	1	13th August 2006 11:08 AM
sae x25a power amplif	pengxy	Solid State	0	29th April 2005 04:52 AM
SAE MARK4 -D/DM Power Amp.	Siliconplanar	Solid State	2	12th January 2003 08:13 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th March 2011, 12:32 AM	#2
llwhtt diyAudio Member Join Date: Jun 2008	I have a friends P10 that I'm collecting parts for a complete rebuild, worth it or not. Someone has already replaced the power lamp with some LEDs that are also very dim, will have to work on that once I get it back together. I can't help you on your lamp choice but what I've been searching high and low for is a schematic, do you have a schematic? It's as these Series II components never existed. Craig

9th March 2011, 01:26 AM	#3
darthy diyAudio Member Join Date: Aug 2008	Sorry, No repair manual for the SAE TWO P 10 . I really enjoy this amp, it sounds very neutral and works well as a headphone amp too.

18th June 2011, 04:05 PM	#4
Gavrikon diyAudio Member Join Date: Jun 2011	Does anyone know how to re-solder the power leads so that I use 220 here in Germany. It was originally a 220 model that was converted to 110 while in America.