Hi, can anyone tell me the bias setting for this amp??
100mA per mosfet pair
100mA per pair is generally accepted as a good value for optimum sound quality, but in this case you are looking at 160V rail to rail so with 2 channels you will be dissipating 160W idling.
That is quite high for a PA amp. I'm not sure about the recomended bias for the Citronic but my c-audio mosfet amp has a quoted bias of 150mA This is probably quite enough to avoid any crossover distortion
That is quite high for a PA amp. I'm not sure about the recomended bias for the Citronic but my c-audio mosfet amp has a quoted bias of 150mA This is probably quite enough to avoid any crossover distortion
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.