|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
13th January 2011, 09:55 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2010
|
Project from Proton D1200?
This amp has been acting up and I have been unable to get assistance locally to fix it so I am considering using some the transformers, caps, and whatever else I can use for a stereo amp build. The problem was one channel would cut out from 1/2 to 1 hour of run time. Wiggling the jacks caused the opposite channel to cut out - sometimes. Looking at the board under magnification didn't show anything, connections seemed OK, etc. I am not a circuit designer but am comfortable doing some soldering, but the simpler the better. Would some of these parts be good for a build for a 41Hz amp or ??
(4) Nichicon 15,000uF 120wv 85C caps (2) 2200uF 63wv 85C caps Heatsink is 4-1/4" x 2-1/2" x 11-1/4" long Transformers as shown in attachment. Suggestions? Thanks in advance. Eric |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Proton D1200 Advice | LHMAudio | Solid State | 4 | 9th May 2011 05:42 AM |
| Proton D1200 Question | 1965GTO | Solid State | 2 | 11th September 2010 10:39 PM |
| Directed D1200 | mike49504 | Car Audio | 3 | 6th July 2010 01:34 AM |
| Viper (Directed) d1200.1 Supply Fet Problem | amc32 | Car Audio | 13 | 1st January 2009 03:14 PM |
| elan d1200 | vpolineni | Class D | 0 | 29th November 2007 04:53 AM |
| New To Site? | Need Help? |
| Page generated in 0.07263 seconds (65.20% PHP - 34.80% MySQL) with 11 queries |
