diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Behringer A500 (http://www.diyaudio.com/forums/solid-state/180418-behringer-a500.html)

rene1234 4th January 2011 01:00 PM

Behringer A500
 
I have 2 Behringer A500s that apart from a few problems (front pots dirty etc) One channel has now developed a fault where the clip and prot LEDs come on and off with the sound. Anyone have a full schematic?

:deer:

meanman1964 4th January 2011 05:07 PM

1 Attachment(s)
Here you go

LAJ 4th January 2011 06:13 PM

This is a classic QSC style amp with the grounded collectors on the outputs. If your outputs check good, then you've most likely got DC coming out of your op amp (causing DC on the output). The op amps fail frequently if an output fails because they are DC coupled. Check for unbalanced supply rails to the op amps first as this is the most frequent source for trouble in these amps. Also check caps. Good luck.


All times are GMT. The time now is 01:32 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2