Inexpensive module using +/-75 VDC rails?

[Racket Scientist]

I have an old PA amp that cooked itself. The power supply is okay and puts out 75 VDC. Its a heavy duty steel 3 rack unit case, so plenty of room. I'd love to find some inexpensive amp modules, preferably prebuilt, to drop into it. Good sound quality and fairly robust output into 8 ohms stereo is the goal. I'd rather not spend more than about $150 if possible - plenty of other amps out there I could just replace it with if I get over that price range. Any suggestions?

[Bigun]

Good quality high power (75V) modules should cost about that much just in parts, not to mention labour and added value of the design - I doubt you'll find any commercial modules designed for that power range unless it's something risky off eBay. I'd suggest you go ahead with your plan B.

[nigelwright7557]

Originally Posted by Racket Scientist

I have an old PA amp that cooked itself. The power supply is okay and puts out 75 VDC. Its a heavy duty steel 3 rack unit case, so plenty of room. I'd love to find some inexpensive amp modules, preferably prebuilt, to drop into it. Good sound quality and fairly robust output into 8 ohms stereo is the goal. I'd rather not spend more than about $150 if possible - plenty of other amps out there I could just replace it with if I get over that price range. Any suggestions?

I would suggest ebay, loads of ready built modules on there.
I have seen some that run off your supply voltages too.