C-Audio RA3001 Diagram?

Keyfixer · 16th November 2010, 01:35 PM

Hi

Hope I'm posting in the correct area as I'm new on here!

Just wondering if anyone knows where I can obtain a service manual / schematic / diagram for a c-audio RA3001 Amp?

Just got one in for repair and it's blowing the 1.6 amp fuse in the soft start circuit.

I found some old posts asking the same question and have tried contacting those members but no success.

Thanks in advance for any help.

Wayne.

Davwal · 4th December 2010, 06:55 PM

Hi Wayne,
RA schematics here

More than lightly fried some output devices.

Dave

Keyfixer · 16th December 2010, 01:16 PM

Thanks for that link Dave, really appreciate it.

Though have to just say that I did get a Schematic already from Lee.Basham ( on this site) so thanks to Lee as well.

Just need to source the bl**dy FETs now!

Wayne

sakis · 16th December 2010, 03:23 PM

make sure that you dont have a rectifier issue first ... if the amp is not pushed around it is more possible that you might have a failure there

kind regards
sakis

16th November 2010, 01:35 PM	#1
Keyfixer diyAudio Member Join Date: Nov 2010	C-Audio RA3001 Diagram? Hi Hope I'm posting in the correct area as I'm new on here! Just wondering if anyone knows where I can obtain a service manual / schematic / diagram for a c-audio RA3001 Amp? Just got one in for repair and it's blowing the 1.6 amp fuse in the soft start circuit. I found some old posts asking the same question and have tried contacting those members but no success. Thanks in advance for any help. Wayne.

16th December 2010, 03:23 PM	#4
sakis diyAudio Member Join Date: Jan 2006 Location: nea makri athens greece	make sure that you dont have a rectifier issue first ... if the amp is not pushed around it is more possible that you might have a failure there kind regards sakis __________________ SERVICE ΙΑΠΩΝΙΚΩΝ ΜΗΧΑΝΗΜΑΤΩΝ ΗΧΟΥ www.eastelectronics.gr

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need advice on a faulty c audio ra3001!!	dean ashmore	Solid State	23	8th December 2010 08:24 PM
C-audio RA3001	viocaia	Solid State	7	2nd May 2010 02:48 AM
C Audio RA3001.....I could do with some help!!	stevetyphoon	Solid State	0	3rd November 2009 04:53 PM
Need schematics for c audio ra3001	dean ashmore	Solid State	1	15th November 2008 08:48 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th December 2010, 06:55 PM	#2
Davwal diyAudio Member Join Date: Dec 2008	Hi Wayne, RA schematics here More than lightly fried some output devices. Dave

16th December 2010, 01:16 PM	#3
Keyfixer diyAudio Member Join Date: Nov 2010	Thanks for that link Dave, really appreciate it. Though have to just say that I did get a Schematic already from Lee.Basham ( on this site) so thanks to Lee as well. Just need to source the bl**dy FETs now! Wayne

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)