Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

AV Receiver turns on for a second, then turns off
AV Receiver turns on for a second, then turns off
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 16th November 2010, 01:21 AM   #1
nige838 is offline nige838  United States
diyAudio Member
Join Date: Dec 2009
Default AV Receiver turns on for a second, then turns off

I have a Onkyo AV Receiver model HT-R8230. It turns on for a second, then goes into safe mode (unit turns off, then the standby light blinks). I've spent the last several hours searching for information, with nothing to show. I have checked the fuses, all good. I have carefully inspected the components, all appear to be ok. I have checked the rectified voltage, 47v, ok.

I'm curious if anybody has any ideas or direction. This Receiver sounds really good, otherwise I'd just part it out...

I've repaired 2 units before this one, both from the '70s, so I have some idea of what I'm doing...

Any help and direction would be greatly appreciated...

  Reply With Quote
Old 16th November 2010, 01:46 AM   #2
c2cthomas is offline c2cthomas  United States
diyAudio Member
c2cthomas's Avatar
Join Date: Oct 2006
Location: Near "Music City" (Nashville Tennessee)
The owner manual sez that the protection circuit has kicked in and to take it to a service center.

Lot's of things can trip up a protection circuit - shorted speaker wires - shorted speakers being the most common. Disconnect the speaker wires at the units terminals and see if it fires up. If it does then check your wiring and speakers for shorts.
After that it's usually as sign of blown output xsistors and/or something near them (usually a cap or diode shorted to ground or Vcc). Seeing how the fuses are not blowing it looks as if something has "opened" rather than shorted.

DIY audio can be expensive but getting to see things go up in smoke - that's priceless!!!! ..... "whatever - call it brainfart of Mighty ZM"

Last edited by c2cthomas; 16th November 2010 at 01:50 AM.
  Reply With Quote


AV Receiver turns on for a second, then turns offHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Teac AG-v8050 home receiver turns off after it turns on eroc1313 Chip Amps 1 20th November 2009 04:18 AM
Help with an amp, turns on but no sound HeavyD'sCustom Car Audio 40 5th May 2009 04:36 PM
Precision Power PC6600.2 Amp turns on then immediately turns off. Need help! autolink Car Audio 4 15th March 2009 03:12 AM
Which turns you on? nl Digital Source 0 30th July 2004 11:50 PM

New To Site? Need Help?

All times are GMT. The time now is 08:06 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio