Wanted , Simple 150 to 200watts amplifier

[yoyomaster01]

Can anybody give a 150 to 200 watts amplifier schematic?

Or just teach me how to bridge 2 pcs DX amp, because I have one, but i'm not using it anymore because cant push my 12" subwoofer to its limit.


4ac613e8-0925-4693-a3ac-12dea6aa3ed5
1.03.01

[AndrewT]

go to ESP
Elliott Sound Products - The Audio Pages (Main Index)

[lineup]

Originally Posted by yoyomaster01

Can anybody give a 150 to 200 watts amplifier schematic?

Or just teach me how to bridge 2 pcs DX amp, because I have one, but i'm not using it anymore because cant push my 12" subwoofer to its limit.

There is a substancial difference for Amplifier 150-200 Watt RMS into 4 Ohm
and the same into 8 Ohm.
But if nothing else is told, we will assume you talk normal 8 Ohm.

Subwoofer/Bass amplifiers have some special features.
And should be able to output heavy current peaks.
It is always better to use a dedicated Bass amplifier for subwoofers.

[diptangshu]

Originally Posted by yoyomaster01

Can anybody give a 150 to 200 watts amplifier schematic?

see the attached file, this may help you. if helps please let me know..

[yoyomaster01]

Originally Posted by lineup

There is a substancial difference for Amplifier 150-200 Watt RMS into 4 Ohm
and the same into 8 Ohm.
But if nothing else is told, we will assume you talk normal 8 Ohm.

Subwoofer/Bass amplifiers have some special features.
And should be able to output heavy current peaks.
It is always better to use a dedicated Bass amplifier for subwoofers.

Hi my subwoofer is 6 ohms, i have used ESP's subwoofer processor with the dx amp but cant still push my subwoofer to its maximum excursion,
And when i try to play it at full range the sound is clipping. idont know why?

[yoyomaster01]

Hi Can you give me the schematics of that design?

Thamks for your post!!!!!

[AndrewT]

What is YoYo's intention?
Do you want to build a 150W into 6r0 amplifier for your own use?
or
do you want us to supply all the information so that you can go into production and make a profit without any capability to service your customers?

Your blog shows 2955/3055 for outputs. Do you have the datasheet?
Have you any information about your output devices?

[quasi]

Originally Posted by yoyomaster01

Hi Can you give me the schematics of that design?

Thamks for your post!!!!!

Schematics available here: Nmos200 - Quasi's DIY Audio Site

Cheers
Quasi

[yoyomaster01]

Hi!! i just want to make one for my own,

I try to build ESP's P68 but im failed to make it work.

My neighbor used to blast his audio early in the morning so i want to defeat his horrible sounding stereo

any help out from you?