diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   How to fix stuck tuning dial... (http://www.diyaudio.com/forums/solid-state/173138-fix-stuck-tuning-dial.html)

vandalfsens 6th September 2010 01:26 PM

How to fix stuck tuning dial...
 
The tuning indicator on my Nikko NA-550 is stuck. Spinning the weighted knob does the job but the indicator does not move at all so there must be a broken wire or a disconnect somewhere.

Most common fix?

Thank You!

bob91343 6th September 2010 03:46 PM

It's a simple mechanical arrangement. Take off the cover and look at it. If it's the usual pointer that doesn't move, it's slipping on the cord. A dab of glue or pinch of the clip will do it.

djk 6th September 2010 05:54 PM

The cord could be stretched too.


All times are GMT. The time now is 10:36 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki