Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Compound Lateral FET for higher power Class AB amp.
Compound Lateral FET for higher power Class AB amp.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st August 2010, 08:21 AM   #1
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Compound Lateral FET for higher power Class AB amp.
Default Compound Lateral FET for higher power Class AB amp.

Another of my wild ideas.

I have been wondering what would happen if a Lateral FET were paralled with a HEXFET ?

In a Class AB amp at low outputs the lateral would do all the work as the Vgs threshold of the HEXFET would not be reached.
As output increases then the HEXFET would come into play due to it's higher Vgs.

A quick examination of the Vgs characteristics between the two shows this "effect" may be possible. Also not shown, but perhaps using different low value source resistors could also be used to tweak the overall characteristic.
Attached Images
File Type: jpg Compound FET.jpg (37.5 KB, 413 views)
  Reply With Quote
Old 21st August 2010, 09:40 AM   #2
jan.didden is offline jan.didden  Europe
diyAudio Member
 
jan.didden's Avatar
 
Join Date: May 2002
Location: The great city of Turnhout, BE
A nice idea Mooly.

What would probably be an issue is the sudden break in gain or Gm when the hexfet comes in. That would cause a non-linearity in the OL transfer characteristic.
Possibly this can be tweaked or smoothed by giving the two devices each their own different Rs.

jd
__________________
Music is dither to the brain; lets me think below the usual chaos - me
Get more Linear Audio for less! Check out my Autoranger and SilentSwitcher
  Reply With Quote
Old 21st August 2010, 09:41 AM   #3
AKSA is offline AKSA  Australia
diyAudio Member
 
Join Date: Sep 2001
Location: Melbourne, Australia
Vgs on a lateral is much, much less than for a hexfet, typically 0.5V versus 3.5V.

Consequently, to avoid current hogging, you'd really need to use a very large source resistor on the lateral. The crossover would then be handled by the laterals, with the hexfet chiming in at high power.

Another, perhaps better technique, might be to use a compound bias generator, so that both fets were biased on at quiescent, and 'in step' so to speak. But you are still up against very different transconductances, typically 1S for the lat and 5S for the hex.

This too is a complicating factor, but, I suspect it's doable.

Hugh
__________________
Aspen Amplifiers P/L (Australia)
www.aksaonline.com
  Reply With Quote
Old 21st August 2010, 11:06 AM   #4
jan.didden is offline jan.didden  Europe
diyAudio Member
 
jan.didden's Avatar
 
Join Date: May 2002
Location: The great city of Turnhout, BE
Quote:
Originally Posted by AKSA View Post
[snip]Another, perhaps better technique, might be to use a compound bias generator, so that both fets were biased on at quiescent, and 'in step' so to speak. But you are still up against very different transconductances, typically 1S for the lat and 5S for the hex.
[snip]Hugh
Yes good idea.

jd
__________________
Music is dither to the brain; lets me think below the usual chaos - me
Get more Linear Audio for less! Check out my Autoranger and SilentSwitcher
  Reply With Quote
Old 21st August 2010, 11:47 AM   #5
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Compound Lateral FET for higher power Class AB amp.
Jan and Hugh, thanks for your thoughts. A compound bias generator sounds intriguing although I guess my thoughts were to have the hexfet have zero contribution (and hence run cold) until it was "called into action". Almost like a form of current dumping as it were.

Would that OL non linearity be audible I wonder as it would occur at high level and be under control of NFB, hmmm, plenty to think on I guess.
  Reply With Quote
Old 21st August 2010, 12:21 PM   #6
jan.didden is offline jan.didden  Europe
diyAudio Member
 
jan.didden's Avatar
 
Join Date: May 2002
Location: The great city of Turnhout, BE
Current dumping doesn't have the problem of a bend in the OL transfer as it works by modifying the feedback factor when the dumpers come on.
That's an option: use the laterals as low power class A and use the hexfets as current dumpers in a current dumping bridge. But it's a bit more involved

jd
__________________
Music is dither to the brain; lets me think below the usual chaos - me
Get more Linear Audio for less! Check out my Autoranger and SilentSwitcher
  Reply With Quote
Old 21st August 2010, 12:27 PM   #7
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Compound Lateral FET for higher power Class AB amp.
A lot more involved I'd say

Ideas to perhaps revisit at some point.
  Reply With Quote
Old 21st August 2010, 12:41 PM   #8
AKSA is offline AKSA  Australia
diyAudio Member
 
Join Date: Sep 2001
Location: Melbourne, Australia
Indeed, Mooly, worth a try as a compound, and in truth you can still 'dump' on the hexfet with judicious biasing and choice of Rs.

This would involve some modelling (not too much, laterals have poor PSpice models) and a lot of building and testing. If you use global feedback, there is no reason why the abrupt change in transconductance, albeit at some higher voltage than crossover, could not easily be accommodated into a smooth transfer.

Cheers,

Hugh
__________________
Aspen Amplifiers P/L (Australia)
www.aksaonline.com
  Reply With Quote
Old 21st August 2010, 01:29 PM   #9
jan.didden is offline jan.didden  Europe
diyAudio Member
 
jan.didden's Avatar
 
Join Date: May 2002
Location: The great city of Turnhout, BE
Yes it might even look like Doug Self's XD but symmetrical around the zero output point.
I think the main idea would be to:
- make the laterals work in class A for some small power range like the First Watt ;
- smoothly bring in the hexfets. The 'smoothly' is very important: the smoother it happens, the lower order the harmonics from the non-linearity will be and the better the feedback can ehh... smooth them out.

jd
__________________
Music is dither to the brain; lets me think below the usual chaos - me
Get more Linear Audio for less! Check out my Autoranger and SilentSwitcher
  Reply With Quote
Old 21st August 2010, 03:31 PM   #10
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
I can't model a parallel pair in my head, so I am way out of my depth, but here goes.
Run the Laterals with a conventional Rs to give your 1W of ClassA (Ib=250mA)
Add a large Rs to the Vfet to bring it's transconductance down from that high 4s to 5S starting value. Ib~0mA

As signal voltage rises the Vfet starts to turn on and gradually comes in to match the current flow of the Lateral.

Is it any more complicated than that? Probably!!
__________________
regards Andrew T.
  Reply With Quote

Reply


Compound Lateral FET for higher power Class AB amp.Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Audio (Lateral) MOSFET's for Class AB - Overview, P-Spice URL's tiefbassuebertr Solid State 57 20th November 2015 12:17 PM
higher power class T for outdoor home theatre draizinbrew Class D 2 24th October 2006 08:58 PM
JHL Class A ,Higher power circuit, 40W Class A nicolas888 Solid State 8 13th April 2006 05:27 PM
Thumb Rule for determining Approx output power of class AB amp rajeev luthra Solid State 12 3rd August 2004 08:34 PM
Class AB car amp, switchmode power supply, what rails?? SkinnyBoy Solid State 4 8th December 2003 03:26 PM


New To Site? Need Help?

All times are GMT. The time now is 10:31 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki