|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
9th July 2010, 06:05 AM
|
#1 |
|
diyAudio Member
Join Date: Jul 2010
|
Help to connect powered mixer with amp.
Okay, I am in a bit of a panic. I need to throw a system together in the next couple days. I have a Peavey XR696F(2x600 Watts) Powered Mixer and would like to connect a Tapco J800. My hope is to use the 2 amps from the powered amp to run FOH and the Tapco to run a couple monitors. The XR696 has the following 1/4" connection:
Ft. Sw EFX Defeat, Line OUtputs-Monitor/Left Mono/Right, Power Amp In-Left/Right So that is 6 connections in all. What I would I run from the Peavey to connect into the Tapco to get the setup I am hoping for? Here is a link to the back of the Tapco. Picture Viewer Any help on this would be much appreciated. |
|
|
9th July 2010, 12:31 PM
|
#2 |
|
diyAudio Member
Join Date: Apr 2003
Location: Copenhagen, Denmark
|
Not being into PA or knowing the Peavey XR696F, you should use the Line Outputs from the Peavey, and connect them to the Line Inputs on the Tapco
__________________
Free Schematic and Service Manual downloads www.audio-circuit.dk, Company: www.dupont-audio.com, Joint venture: www.DupontMantra.com |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Passive mixer with powered preamp? | VanZea | Solid State | 4 | 4th May 2010 03:16 PM |
| Yamaha powered mixer, need help troubleshooting | netwerx1 | Instruments and Amps | 1 | 8th April 2010 02:39 AM |
| Using a power amp with a powered mixer | KPhoenix | Solid State | 8 | 20th October 2007 10:48 PM |
| Tda7294 blown in powered mixer | megajocke | Solid State | 5 | 15th January 2007 11:07 AM |
| Powered Mixer Noises | guitargully | Solid State | 0 | 9th January 2004 09:52 PM |
| New To Site? | Need Help? |
| Page generated in 0.06389 seconds (66.31% PHP - 33.69% MySQL) with 10 queries |
