Parasound HCA 2205A "high temp" always on

k0tuynh · 20th June 2010, 09:03 PM

Hi all,

I have the problem with my HCA 2205A amp. The “high temp” light of channel 4 is suddenly on even though the amp is not hot. I am currently only using channel 1, 2, and 3 for my 3.1 set up. Channel 4, and 5 are not hooking up to anything. I unplugged the power and plugged the power on again after 24 hours and the problem still exists.

Can you please let me know what the problem is? Is there anything I can do to fix the problem or I have to call Paraound CS and have them fix.

Maybe John Curl can chime in and give me his $ 0.02

Thanks

john curl · 20th June 2010, 09:31 PM

Email Tony at Parasound.

k0tuynh · 20th June 2010, 10:28 PM

Quote:

Originally Posted by john curl

Email Tony at Parasound.

Will do, thanks

tpaxadpom · 19th November 2010, 08:31 PM

I have the same problem with my HCA-2205 except it is channel 5. Did you ever figure out what it was?
thanks in advamce.

20th June 2010, 09:03 PM	#1
k0tuynh diyAudio Member Join Date: Jun 2010	Parasound HCA 2205A "high temp" always on Hi all, I have the problem with my HCA 2205A amp. The “high temp” light of channel 4 is suddenly on even though the amp is not hot. I am currently only using channel 1, 2, and 3 for my 3.1 set up. Channel 4, and 5 are not hooking up to anything. I unplugged the power and plugged the power on again after 24 hours and the problem still exists. Can you please let me know what the problem is? Is there anything I can do to fix the problem or I have to call Paraound CS and have them fix. Maybe John Curl can chime in and give me his $ 0.02 Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parasound HCA-2205AT	dkahs	Solid State	12	19th September 2008 12:36 PM
Using 5x220w parasound 2205a for stereo bi-amping, good or better off?	Frosti	Solid State	0	16th June 2008 02:14 AM
Parasound HCA-1200	Leon1	Solid State	0	16th January 2008 06:02 PM
Parasound HCA-1200	Rod	Solid State	0	21st November 2006 06:32 AM
parasound HCA-1206 (Tony at Parasound.com)	ostie01	Solid State	0	8th April 2006 07:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th June 2010, 09:31 PM	#2
john curl diyAudio Member Join Date: Jul 2003 Location: berkeley ca	Email Tony at Parasound.

19th November 2010, 08:31 PM	#4
tpaxadpom diyAudio Member Join Date: Aug 2006	I have the same problem with my HCA-2205 except it is channel 5. Did you ever figure out what it was? thanks in advamce.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)