|Solid State Talk all about solid state amplification.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|9th June 2010, 07:09 PM||#1|
Join Date: Jun 2005
Location: East of Uddersfield
Meridian 101 Moving Coil modules
I have just aquired a Meridian 101 Preamp, an early 3 module discreet transistor version to go with my M2 active speakers.
The preamp is fitted with a Moving coil input module labeled Ortofon moving coil, dated 197?something.
I would like to use it with a Denon DL103, i contacted Meridian to see if the Ortofon module would be compatable with the Denon, they thought the gain would be on the low side, but could offer no further technical information on the Ortofon Module.
Does anyone have any schematics or info as regards loading and gain of the input modules, particulally the Ortofon one fitted?
Can the input module gain be increased by changeing a feedback resistor?,
Or would it be possible to remove the plug in module and replace it with a diy, higher gain module more suitable for the Denon?
Any help or info would be much appreciated.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Meridian 101 recap||RCruz||Solid State||72||14th September 2011 09:17 AM|
|Moving Coil preamp design||paul joyce||Solid State||162||26th October 2010 10:36 PM|
|Meridian 101 moving coil module||RCruz||Analogue Source||1||24th April 2007 10:34 PM|
|moving coil loading||lt cdr data||Analogue Source||28||27th June 2005 09:50 PM|
|SL10 Moving Coil Stage||johnsciolino||Pass Labs||1||25th October 2004 05:05 PM|
|New To Site?||Need Help?|