|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
|
Triadtron
At least it sure looks like it to me. All I see different is that the 'sense' resistor that monitors the current through the output has moved so that it sits above the top output device instead of being between the output devices.
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig. |
|
|
|
|
#2 |
|
The one and only
|
No, I wouldn't call it an SRPP.
Nice to see that John's still doing stuff and putting it up there.
|
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Nov 2006
|
That split anode resistor is something a couple of guys have been playing around with over in the tubes section...
|
|
|
|
|
#4 |
|
diyAudio Member
|
I've been looking at SRPP for some time (theoretically) and the Taylor output structure. All these minor variations are starting to look the same to me. I see almost all circuits are the same save for a few changes here and there - you can go from one topology to another with just a few twists and turns. It's like a cave system, you wander down a tunnel and end up somewhere you thought you went already.
It's not unenjoyable.
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| the Reversal SRPP | Stee | Tubes / Valves | 18 | 15th May 2010 11:11 AM |
| 5687 Srpp | Scrappydoo | Tubes / Valves | 7 | 28th March 2009 02:56 AM |
| To SRPP or not? | duderduderini | Tubes / Valves | 2 | 12th March 2007 03:01 PM |
| SRPP + Gainclone | Jay | Tubes / Valves | 4 | 27th September 2005 06:27 PM |
| SRPP is....? | peranders | Tubes / Valves | 8 | 19th December 2003 08:38 PM |
| New To Site? | Need Help? |
| Page generated in 0.09181 seconds (63.31% PHP - 36.69% MySQL) with 10 queries |