|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
4th May 2010, 11:50 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2007
|
mcintosh 2505 recap question
Hello to all. I am in the middle of recaping my 2505. I am restuffing the 4 metel can ones.One of the smaller ones is C-79 500uf@50v.it is mounted on an insulated pad its ground goes over to the next cans ground.Looking down at the circut there are 3 green wires that go to the caps outer can (which is not grounded) & then the + leg goes over to the next cans ground.This tells me that the caps + goes to chassie ground. HOWEVER on the schematic it shows the caps neg. going to ground.If anyone is familiar with this setup please chime in. Thanks, tom
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| McIntosh MC60 Bias question | Pyre | Tubes / Valves | 5 | 7th April 2010 06:03 PM |
| Audio Research SP-5 recap question | bacoburn | Solid State | 5 | 18th October 2009 01:48 AM |
| Recap Problem | 65blkbkgt | Car Audio | 0 | 14th August 2007 09:04 PM |
| First Recap Question | 65blkbkgt | Car Audio | 18 | 1st July 2007 02:38 AM |
| To Recap - A Question | Family_Dog | Tubes / Valves | 5 | 29th May 2006 08:22 AM |
| New To Site? | Need Help? |
| Page generated in 0.12874 seconds (35.09% PHP - 64.91% MySQL) with 10 queries |
