|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
26th April 2010, 04:36 AM
|
#1 |
|
diyAudio Member
Join Date: Apr 2010
|
ppi pc4100 help
I bought a used pc4100 and hooked it up it worked but distorted like hell when turned up and didnt seem to produce any bass just high pass so i took it apart and found a burnt resistor on r26 need to know what kind specs and where to get one. Thanks
|
|
|
26th April 2010, 05:31 AM
|
#2 |
|
diyAudio Member
Join Date: Aug 2003
Location: SIMI VALLEY CA
|
Ppi
It is a 0.22 ohm 3 w metal oxide but if it is burnt then the output device to which it is connected is bad.
Steve Mantz Zed Audio Zed Audio Corporation |
|
|
|
26th April 2010, 01:12 PM
|
#3 |
|
diyAudio Member
Join Date: Apr 2010
|
Thanks. Also I have a old school soundstream reference 10.0 amp that has a blown mosfet I believe it is a Motorola tip 109 mosfet looked everywhere for one and can't find one if anyone can shed some info that would be much appreciated
|
|
|
|
27th April 2010, 12:09 AM
|
#4 |
|
diyAudio Member
Join Date: Apr 2010
|
bump
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PPI amp | mike49504 | Car Audio | 12 | 20th December 2009 10:49 PM |
| PPI ART Series a404 "v" PPI Powerclass pc450 swap | chemhaz | Car Audio | 2 | 21st November 2008 02:23 PM |
| Ppi Pc4100? | dangus | Car Audio | 5 | 12th April 2008 06:44 AM |
| ppi pc4100 no output, help! | rawadia | Car Audio | 27 | 17th March 2008 11:43 PM |
| Ppi Pc450 | Shaft | Car Audio | 18 | 1st July 2007 07:51 AM |
| New To Site? | Need Help? |
| Page generated in 0.07768 seconds (64.37% PHP - 35.63% MySQL) with 11 queries |
