Need Schematis for a Pioneer VSX-9700S

carstereogeek · 5th April 2010, 11:51 AM

I found a vintage Pioneer VSX-9700s surround reciever at a garage sale for $10! There is no sound from the two front channels.There are two blown 6 amp fuses on the main board next to the transformer.I can not see any parts that "burned" or discolored.I would like to get some schematics,so I can check things out before I fire it up again.

Thanks in advance for any help.

Steve

WILL5317 · 4th January 2012, 07:26 AM

Steve This receiver has a very goo protection circuit in it. If these fuses are plown replace them. Make a load lab by placing a 100 watt light bulb in series with one of the legs to main power. this will prevent it from blowing another fuse troouble shoot from there.might just work.

5th April 2010, 11:51 AM	#1
carstereogeek diyAudio Member Join Date: Jan 2006 Location: oklahoma	Need Schematis for a Pioneer VSX-9700S I found a vintage Pioneer VSX-9700s surround reciever at a garage sale for $10! There is no sound from the two front channels.There are two blown 6 amp fuses on the main board next to the transformer.I can not see any parts that "burned" or discolored.I would like to get some schematics,so I can check things out before I fire it up again. Thanks in advance for any help. Steve

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer VSX 454 Schematics	zee	Solid State	1	10th November 2010 08:59 AM
Pioneer Vsx 504 s schematic	bobo69	Solid State	0	23rd November 2005 12:28 PM
Questions About Pioneer VSX-* Transistors	basic*illusions	Solid State	1	25th February 2005 11:53 PM
Pioneer VSX-425 Schematic	li_gangyi	Solid State	2	25th March 2004 09:50 AM
pioneer vsx-425	antonP926	Solid State	0	25th March 2004 01:34 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th January 2012, 07:26 AM	#2
WILL5317 diyAudio Member Join Date: Jan 2012	Steve This receiver has a very goo protection circuit in it. If these fuses are plown replace them. Make a load lab by placing a 100 watt light bulb in series with one of the legs to main power. this will prevent it from blowing another fuse troouble shoot from there.might just work.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)