diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Speaker delayed insertion, speaker protector, off set sensor (http://www.diyaudio.com/forums/solid-state/164276-speaker-delayed-insertion-speaker-protector-off-set-sensor.html)

destroyer X 1st April 2010 10:54 AM

Speaker delayed insertion, speaker protector, off set sensor
 
3 Attachment(s)
having fuses too.

I found in a book...the board was made and sent me as gift, by Mr. Miguel Malheiros (Rio de Janeiro).

Soon i will assemble, adjust and test...if good...then will describe how it works and will post more details to the ones interested.

This is not a Dx Corporation Design...found in a book.... will inform you, the book name, and page, very soon.

In advance will see how this works.

regards,

Carlos

destroyer X 1st April 2010 11:04 AM

A friend provided me the PDF, produce the board layout..it is not a Dx design
 
3 Attachment(s)
That friend printed my name on it...but it is not mine...a mistake only.

Here you have layout..also the book schematic and the board schematic.

The book is "Electricity and Electronics, second edition - G. Randy Slone....book page 278

He is the designer, not me!

The book describes how this works...you can see just watching the schematic..but if result fine, then i will explain, describe, myself.

regards,

Carlos

destroyer X 1st April 2010 11:40 AM

I do not know if this will work fine, if there's some error on it or not
 
1 Attachment(s)
seems fine..but maybe some resistance adjustment may be needed, better transistor selection, or to test ours.... timing adjustment and so on.

Seems fine...but who knows?... sometimes we find mistakes...human mistakes or layout mistakes..parts inverted and so on.

I will assemble and will be happy to let you all know.

Soon.

regards,

Carlos

destroyer X 1st April 2010 01:09 PM

I will use BC546....but observe it is inverted related the 2N models
 
2 Attachment(s)
because of that, you should use 2N5401 or 2N5551 to match the board.

I will invert mine BC546 to match the board.

regards,

Carlos

destroyer X 1st April 2010 01:36 PM

In my case i have to go downtown to buy parts.... exclusive travel to buy 1W zener
 
1 Attachment(s)
Not to go there..only because 2N551 and a zener diode...i will make some changes.... also i may use a 7824 voltage regulator instead these three parts modified.

Maybe Q5 will need a bigger transistor there....more safe....maybe a BD135 or BD139 or something alike...or TIP31C, or TIP41C

regards,

Carlos

gaetan8888 1st April 2010 01:48 PM

Quote:

Originally Posted by destroyer X (Post 2138987)
That friend printed my name on it...but it is not mine...a mistake only.

Here you have layout..also the book schematic and the board schematic.

The book is "Electricity and Electronics, second edition - G. Randy Slone....book page 278

He is the designer, not me!

The book describes how this works...you can see just watching the schematic..but if result fine, then i will explain, describe, myself.

regards,

Carlos

Hello Carlos

Nice circuit, looking at the 1.jpg image, I remember that Cambridge Audio was using a similar but less developped circuit in the P40 amp.

The transistors Q2 and Q3 act like a flip flop circuit (in french we call that une bascule), wen there is a too big signal at output, Q3 will in a blocked situation and the protection are intering in fonction.

Thank for sharing this circuit.

Bye

Gaetan

destroyer X 1st April 2010 02:04 PM

Not mine dear Gaetan...was Randy Slone the one did it
 
1 Attachment(s)
But you are welcome..your kindness to think i have made this.

I have the text book..they explain the way this works.... wonderfull...if you want i can copy and produce small images to send you Gaetan730...but send me an email..to confirm your adress..as i have changed a lot of things here...formating hard drive, installing older (and better) windows...and i have changed also Browser, now using several others, avoiding Internet Explorer...and because of these things i have made..maybe i have lost your email adress...i think i have..but not sure.

carlos.eugenio1951@yahoo.com

We call here "multivibrador".....multivibrateur may be in your language...or "biestavel"

These are nice things...lamps goes flicking very low frequency while condenser goes charging..lovely effect..we can arrange Leds together the relays...so we gonna have a lot of ligths ....this is nice...hehehehh....i like that....maybe ridiculous to others..but i like signals..lamps flashing..these things.

This needs adjustment...to our own personnal tast.that frequency...also the ligth decay time..maybe some minor modifications will be done....i will do that those next two days.... then i will offer, not my design, but my work, follow up,.....my help.

I am changing the silk screen, to help builders (if someone turns interested)... to use BC546, as this transistor has inverted leads when compared to 2N5551.

By the way, dear Gaetan (mon bon ami).... this picture you're using is nice..you are handsome..good looking guy.... seems someone we can trust..someone that has enormous heart...someone that has friends with the same value of Gold!

regards,

Carlos

gaetan8888 1st April 2010 02:10 PM

Quote:

Originally Posted by destroyer X (Post 2139124)
But you are welcome..your kindness to think i have made this.

We call here "multivibrador".....multivibrateur may be in your language...or "biestavel"

regards,

Carlos

Hello Carlos

Yesss, multivibrator in english, I did not remember it, but in some french book it also named bascule wen it's in a protection circuits.

Keep us in touch about it, I'm sure that many guys will use it.

Thank

Bye

Gaetan

destroyer X 1st April 2010 03:13 PM

Here you have a picture..BC546 installed inverted related the positions indicated by
 
1 Attachment(s)
original silk screen.

Ice Cream is PavÍ flavour....only Latine root people can pronunciate this ending "E" letter closed.

regards,

Carlos

destroyer X 1st April 2010 06:50 PM

Here you have folks..already built..tomorrow i will test
 
3 Attachment(s)
Images attached,

regards,

Carlos

http://img263.imageshack.us/img263/5476/dsdsds1911.jpg


All times are GMT. The time now is 05:16 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2