900W H-class PA Amp with Limiter

[engel dela pena]

andrew
dont forget to put bias control
bias trimer

 

[andrewlebon]

bias control

Hi Engel Dela Pena
greetings please can you give me pages of TEF STAGE on h900
thread and post where sir apex audio showed where to put preset
warm regards
andrew lebon

 

[engel dela pena]

andrew
bias control

 

[engel dela pena]

tripple ef

 

[andrewlebon]

thanks

i start pcb on sunday

 

[engel dela pena]

you can use irvynjay lay out of step
regards

 

[andrewlebon]

POST 1823

how did BD 681 COME its darlington transistor i think final pcb design be like soerdjanto TEF PCB but no protection on pcb
warm regards
andrew lebon

 

[AndrewT]

post1823
R23 must be wrong. 2k2 could be a better value.
The Vbe multiplier output voltage should be around 2400mV, when output bias is set 5mV.

 

[apexaudio]

post1823
R23 must be wrong. 2k2 could be a better value.
The Vbe multiplier output voltage should be around 2400mV, when output bias is set 5mV.

R23 is OK, the Vbe multiplier output voltage with darlington should be around 3600mV max.

 

[AndrewT]

my oops.
The Vbe multiplier voltage should be around 3600mV.
R23 is still wrong.

 

[engel dela pena]

TEF 8 pairs

 

[yosie48f]

"BETTER THAN NEVER"

"BETTER THAN NEVER".........

 

[yosie48f]

"BETTER THAN NEVER".........

I mean ''BETTER LATE TAHN NEVER"

 

[wattaniya]

"BETTER THAN NEVER".........

hi yosie48f,
what this mean "BETTER THAN NEVER".
how is ur h900? mean sound and power?

 

[yosie48f]

hi yosie48f,
what this mean "BETTER THAN NEVER".
how is ur h900? mean sound and power?

I mean "BETTER LATE THAN NEVER"...my h900+tl071 is great, powerfull & sound is clear.

 

[wattaniya]

h900 in progress.

 

[sameer x1]

H900 TEF TRIAL DRIVER PCB

Dear Sir apex audio
hello just want to ask you few points on h900 tef
1 which schematic i must follow one with darlington BD681 and 10k preset or the MJE
340 bias transistor without preset personally i would like to have preset for biasing
i plan to have 8 pairs in output pcb i post is for trial only i will design pcb with output and drivers on both sides so please can you help me
thanking you
sameerx1

 

[sameer x1]

clearer jpeg

this can be zoomed

 

[sameer x1]

final pcb

final pcb will be like this engel dela pena
warm regard
sameerx1

 

[apexaudio]

Dear Sir apex audio
hello just want to ask you few points on h900 tef
1 which schematic i must follow one with darlington BD681 and 10k preset or the MJE
340 bias transistor without preset personally i would like to have preset for biasing
i plan to have 8 pairs in output pcb i post is for trial only i will design pcb with output and drivers on both sides so please can you help me
thanking you
sameerx1

Follow schematic with darlington BD681 and 10k preset for biasing, and I suggest balanced input like in BX500 with volume pot.
Regards