Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Need help with Rockford Fosgate 801s
Need help with Rockford Fosgate 801s
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th February 2010, 08:00 PM   #1
robsmetalcraft is offline robsmetalcraft
diyAudio Member
 
Join Date: Feb 2010
Default Need help with Rockford Fosgate 801s

I have an 801s I bought used and got burned on. Anyway ,amp powers up, than in less then a minute blow the fuse. I pulled cover and found no signs of obvious damage , checked mosfets impedance across outer pins and all measure in the mega ohm range with same readings for the similar ICs. Since I can't keep it running long enough to trouble shoot (I also tried powering up unit without input or output connections and had same results). Next I tried starting it up with larger circuit break hoping problem area will show itself by either blowing itself up or at least heating up enough so I can locate problem area with heat gun. Still nothing, heat at transformer and mosfets but pretty even .This last test was done without input or output connections. I'm just getting into electronics but some knowledge and equipment ,DMM, dual track Fluke scope. Any help would be greatly appreciated. Thanks.Rob
  Reply With Quote
Old 27th February 2010, 09:13 PM   #2
nigelwright7557 is offline nigelwright7557  United Kingdom
diyAudio Member
 
nigelwright7557's Avatar
 
Join Date: Apr 2008
Location: Carlisle, England
You could try breaking it down.
Check power supply on its own is not blowing the fuses.

Look for DC on the speaker output.

Thats a start that might give a clue or two.
__________________
PCBCAD51 pcb design software. http://www.murtonpikesystems.co.uk
  Reply With Quote
Old 27th February 2010, 09:17 PM   #3
robsmetalcraft is offline robsmetalcraft
diyAudio Member
 
Join Date: Feb 2010
So isolate power supply?
  Reply With Quote
Old 27th February 2010, 09:28 PM   #4
robsmetalcraft is offline robsmetalcraft
diyAudio Member
 
Join Date: Feb 2010
Default help

Just looked a schematic which isn't to clear, Not going to be easy to isolate. I 'am worried that it's the transformer ? I tried uploading schematics.File to big, sorry. I can email if someone wants it?

Last edited by robsmetalcraft; 27th February 2010 at 09:37 PM. Reason: Schematics never loaded
  Reply With Quote

Reply


Need help with Rockford Fosgate 801sHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rockford fosgate 800a2 fongman Car Audio 40 9th September 2014 11:18 AM
Rockford Fosgate 801s mike49504 Car Audio 11 17th February 2010 11:47 PM
Rockford Fosgate T20001bd Triden312 Class D 3 22nd November 2009 10:54 PM
Rockford Fosgate/Mosfet steven123654 Car Audio 5 2nd September 2009 02:13 AM
rockford fosgate 500s mike49504 Car Audio 14 20th October 2006 06:04 PM


New To Site? Need Help?

All times are GMT. The time now is 09:05 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki