|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
4th February 2010, 05:41 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2010
|
Parasound Zamp V2 - help
I've acquired a Parasound Zamp V2 that was basically unused because it blew fuses. I took a chance and found that the wiring to the 110/220 switch was wrong
 , which caused a short at the switch. I've tested what I believe is the correct wiring for 110, bypassing the switch, and it works fine  . However, I would like to wire it up to design-spec through the switch; but, If anyone could help, I need an internal close-up photo of the wiring at the fused plug and 110/220 switch to get it back to spec. I'd appreciate it.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Zhaolu V2.5.... A and C | ashok | Digital Source | 2 | 6th November 2010 01:32 AM |
| parasound HCA-1206 (Tony at Parasound.com) | ostie01 | Solid State | 0 | 8th April 2006 07:29 AM |
| old Parasound ZAMP | Senn | Solid State | 2 | 3rd December 2005 06:39 PM |
| Line array V2.0 | chipco3434 | Multi-Way | 4 | 10th April 2004 02:14 PM |
| A Baby Zen V2 | jh6you | Pass Labs | 13 | 1st October 2002 02:44 PM |
| New To Site? | Need Help? |
| Page generated in 0.05666 seconds (74.45% PHP - 25.55% MySQL) with 10 queries |
