Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Texas THS6012 used as a high quality amp.
Texas THS6012 used as a high quality amp.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 27th December 2001, 12:46 AM   #1
Malcolm Jenkins is offline Malcolm Jenkins
diyAudio Member
Join Date: Dec 2001
Location: Aldershot, England.
Default Texas THS6012 used as a high quality amp.

Hi, Malcolm here.
After reading Rod Elliot's article on the Texas THS6012 driver used as a headphone amp on his web site, I decided to try this chip as a differential driver for a horn loaded Lowther EX3. The power out from these chips is a max of 500mW so only high efficiency speakers can be driven. To make life easy, Texas supply an evaluation board, fully built and ready to go.
If you no nothing about this chip, here is a flavour. It's a digital driver for network line transmissions
Zero distortion at all power levels, well actually 0.0001%
dc-450 MHz bandwidth
-119db noise below full o/p
In short, the perfect amp.
So much for the hype. How did it shape up?
I have now taken delivery of the THS6012 evaluation board ($50 direct from Texas Instruments) and it looks promising.
The board worked without modification with each of the two drivers
providing the opposing phase of the signal via a pair of on board 12.4 ohm
resistors. Much more power was available when I shorted thes out.
This was a test setup only and I used a CD headphone output as the
source and a new EX3 which is being broken in (not in a cabinate), so it
is hardly a definative evaluation.
Once some of the roughness of the new EX3 was passed, it became clear
that there was no distortion caused by clipping and the volume was more
than enough to fill the listening room even without horn loading.
There was no hiss or hum eminating from the speaker, even with my ear
right up close to the cone.
I used BNC connectors and co-ax cable in the test setup because BNC
sockets are standard on the evaluation board.
The board itself is built to a very high standard and is totally stable
in operation. Everything you need is provided on the board, including an
additional op-amp to generate a ballanced signal from a an unballance
source. The only downside is the less than ideal
medium input impedance means that the board needs to be driven from a
pre-amplifier with a low (200 ohms) output impedance. This is not a
difficult proposition.
I will drive my boards from the Analod Devices balanced line driver
chips, which I am using with my current horn amps.
I estimate, from the graphs thst TI publish, to be able to deliver 1.8
watts into the 15 ohm EX3s with +-15 V supply.
Regards, Malcolm Jenkins
  Reply With Quote


Texas THS6012 used as a high quality amp.Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
High Quality 100 uF midrange cap. Curmudgeon Parts 9 31st July 2007 06:52 AM
Xbox as a high quality CDP/VDP??? Leolabs Digital Source 0 25th April 2007 02:41 AM
Low wattage, high efficiency, high quality? Nordic Multi-Way 5 5th September 2005 12:12 AM
High Power High Quality Digital Amp aspycaudio Digital Source 0 6th December 2003 10:49 AM
Preamp based on TI THS6012 jteef Solid State 8 27th September 2001 10:19 AM

New To Site? Need Help?

All times are GMT. The time now is 05:15 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio