|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd January 2010, 02:11 AM
|
#1 |
|
diyAudio Member
Join Date: Jan 2010
|
sansui 9090 blowing fuses
im working on a friends 9090. (2 )output transistors were shorted.i replaced them and then had 1 channel clean and 1 distorted one.i found a 2sb536 on the preamp board shorted and also 2 resistors on the same board.i replaced all of them. now im blowing fuses every time i turn the receiver on.if i pull the preamp board i do not blow fuses.i checked all the transistors and resistors and caps on the preamp boards bad side. i see no shorts??.also when i compare resistance readings from the parts on the good side, to the bad side,they read the same? no shorts. why do you think im blowing fuses? what should i check?
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sansui 9090 receiver 4 sale | rcavictim | Swap Meet | 1 | 6th February 2012 12:01 PM |
| sansui 9090 | millertyms | Construction Tips | 0 | 7th November 2009 09:16 AM |
| Keep Blowing Fuses | Whiting | Tubes / Valves | 9 | 11th September 2008 09:44 PM |
| Sansui 9090 DB help | nukei&c | Solid State | 7 | 28th July 2008 02:02 AM |
| Sansui 9090 classic receiver 4 sale | rcavictim | Swap Meet | 0 | 30th April 2005 11:36 PM |
| New To Site? | Need Help? |
