diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Adcom 5400 Thermal Protection LED's. (http://www.diyaudio.com/forums/solid-state/158489-adcom-5400-thermal-protection-leds.html)

Larry S. 12th January 2010 04:03 PM

Adcom 5400 Thermal Protection LED's.
 
Hello,
I have a problem with the right thermal protection led on an
adcom 5400 amp. It stays red but is OK after about 1/2 hour
of listening to music with both speakers delivering sound. Then it
turns on again after the amp is turned off and cools down. I do not
listen to very loud music nor do I listen to music at a very low level,
I know that could trigger the LED's. I took off the cover and checked
for dust and also visually inspected the internal fuses. Is this something
I can live with or will the problem get worse? Any help would be
greatly appreciated!


All times are GMT. The time now is 10:09 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2