bryston clone

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.

Attachments

  • 30112009153.jpg
    30112009153.jpg
    742.5 KB · Views: 739
  • 30112009154.jpg
    30112009154.jpg
    763 KB · Views: 672
Ampfilier is very sound quality but little bass.

Congratulations, it looks like quite a bit of work went into that.

I have a Bryston, the guts of it are a 2B, and the bass is very strong (into my PMC floorstanders). What you built should have at least as much bass as mine.

So the circuit topology should be fine. That leaves components ?

Big power supply capacitors provide energy storage for the amplifier to draw on for big bass peaks so if you've got tiny caps, which it looks like from the photo, you need more capacitance on the power supply rails.
 
Umut arkadaşım.Öncelikle Burda bir turk gördüğüme öncelikle sevindim.

Opamp Preanfisi var.DOA 33 diye isimlendirmişler.Bu cihazı yaparken aynı zamanda crown xls 202 serisini yaptık.İkisini aynı beslemeyle aynı anda dinleyince bu anfi baslarda zayıf insan seslerinde çok iyi.Ancak crownda da bundaki insan sesleri yok. bu likde xls 202 serisi için

Bloggang.com : K_evens : C-500 Power Amplifier
 

Attachments

  • malzeme yerleşim.pdf
    102.7 KB · Views: 272
  • SST PRE.pdf
    87.8 KB · Views: 282
Umut arkadaşım.Öncelikle Burda bir turk gördüğüme öncelikle sevindim.

Opamp Preanfisi var.DOA 33 diye isimlendirmişler.Bu cihazı yaparken aynı zamanda crown xls 202 serisini yaptık.İkisini aynı beslemeyle aynı anda dinleyince bu anfi baslarda zayıf insan seslerinde çok iyi.Ancak crownda da bundaki insan sesleri yok. bu likde xls 202 serisi için

Bloggang.com : K_evens : C-500 Power Amplifier

:cop: Thanks for your post, but please make all future posts in English. This is an international site, so we've made the use of English mandatory in order to have the widest possible understanding.

Many thanks!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.