|11th November 2009, 04:23 AM||#11|
Join Date: Nov 2004
Nico, great answer, I'll copy and paste in my electronic archives for future use!!
Paul, thanks for the information. I already saw the Elliot's page, but I didn't put it in relationship with your tone control. I think that the Crown IC150 preamp should be similar to the Nikko trm-750 stage, and I'll try to give it a look (if I'll find it...).
The schematics that I posted is referred to the line stage - tone control, it works but it has too much gain (I think 10+1, somewhat around 21-22 dB). The question was if I can be able to reduce the overall gain by about 10 dB, even if I loose the boost-cut linearity (really I tend to don't use tone control, and when I use it I apply a VERY small amount of "correction").
The schematics used in your headphone amp has too low gain for my needs, the optimum should be the Nico's last answer approach applied to non-inverting topology, (very educational and appreciated) with a focus to the overall gain.
I like the active component's minimalist approach of the non-inverting topology and I'd like to play with it.
Thanks again Nico and Paul for your precious information.
p.s.: I've just found the Crown schematics, very similar to the Nikko's one, but it seems a better sounding one due to the frequency choice (they look similar to Elliot's choice). If I'll not be able to reduce the gain in my Nikko, surely I'll play with the Crown's value to improve the control.
Here is the pages for the schematics link:
Last edited by diymax62; 11th November 2009 at 04:39 AM. Reason: additional information...
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Nikko Alpha 440 and 450||lazyjoe||Solid State||1||6th August 2016 01:48 PM|
|Nikko Beta Ii||east electronics||Solid State||7||19th March 2010 07:45 AM|
|Who knows the Nikko Alpha II ?||ginetto61||Solid State||4||20th October 2009 05:45 PM|
|Nikko Alpha 220||GEirin||Solid State||4||17th April 2008 09:34 PM|
|Nikko NA2000||sasbgsas||Solid State||0||22nd May 2007 11:23 AM|
|New To Site?||Need Help?|