Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Nakamichi PA-1 problem
Nakamichi PA-1 problem
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 2nd February 2009, 08:31 PM   #1
tarkusnj is offline tarkusnj  United States
diyAudio Member
Join Date: Feb 2009
Default Nakamichi PA-1 problem

Hello to everybody...I am new on here and have been researching the net to gather any info on troubleshooting my Nakamichi PA-1 5 channel amplifier. It began humming and was not working. Now when I turn it on with nothing connected, I keep hearing a relay click on and off at around 5 second intervals. I believe this is the safety circuitry kicking in. Anyway, When I opened up the amp there are 2 plugs going to connectors for the RCA inputs on the rear. One plug has 3 channels on it while the other has 2. When I disconnect the plug with only the 2 channels, the relay stops clicking. This is all I have discovered and I don't know what else to do. I see nothing that looks fried or blown. I have searched high and low for a service manual for this amp hoping maybe that would help me out. I got an estimate to repair the amp of $350 which I don't want to spend. Can anyone give me an idea how to troubleshoot the main board? That is all the amp has including two big transformers and with 2 boards containing a couple of big capacitors.
thanks to anyone who can steer me in the right direction. The amp is in pieces right now and before I go through the trouble of re-assembling it, I want to give it my best shot.
  Reply With Quote
Old 17th February 2009, 03:44 PM   #2
tebbi is offline tebbi  Germany
diyAudio Member
Join Date: Feb 2009
you can try with a multimeter to measure if its dc on the signal path.Or you try to get a schematic.Then you have voltage assignments you can compare with the amp.But Hum, sounds like a deaf capacitor in the main power unit.
greeting stephan
  Reply With Quote
Old 11th October 2011, 08:39 AM   #3
tiefbassuebertr is offline tiefbassuebertr  Germany
diyAudio Member
tiefbassuebertr's Avatar
Join Date: Jul 2005
Location: D-55629 Schwarzerden
for description recapping project go to post #352 about
  Reply With Quote


Nakamichi PA-1 problemHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nakamichi VS. CD-R's Zero Cool Car Audio 10 1st July 2009 07:03 AM
Nakamichi PA7II Problem gto127 Pass Labs 11 17th February 2009 04:50 AM
Nakamichi Cassette Deck 1.5 problem stevecole Analogue Source 3 8th December 2008 11:07 AM
Nakamichi receiver RE-10, microprocessor problem? box63 Solid State 0 8th September 2006 04:22 PM
Nakamichi LX-3 Problem - Help Bruce Analogue Source 1 18th November 2002 06:43 PM

New To Site? Need Help?

All times are GMT. The time now is 04:07 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio