Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Any super current source?
Any super current source?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th August 2009, 04:48 AM   #1
foo is offline foo  Tibet
diyAudio Member
 
Join Date: May 2004
Location: ...
Default Any super current source?

Wanna feed the PCM1794 with constant current source to balance the middle current and lower the I/V loading.

Any suggested circuit for ultra precise and low noise current source up to 12.4ma?
yes 12.4 ma, cause my 1794 is paralleled.
  Reply With Quote
Old 17th August 2009, 05:19 AM   #2
jcx is offline jcx  United States
diyAudio Member
 
Join Date: Feb 2003
Location: ..
if you're using a virtual gnd I/V the "best" current source is the highest value metal film or foil resistor biased with the quietest Vref you can afford
  Reply With Quote
Old 17th August 2009, 06:40 AM   #3
Geek is offline Geek
diyAudio Member
 
Geek's Avatar
 
Join Date: Sep 2004
You'll want to use the "High Performance" circuit option:

http://www.classicvalve.ca/tubepcb.html#CCS

Cheers!
  Reply With Quote
Old 17th August 2009, 07:58 AM   #4
analog_sa is offline analog_sa  Europe
diyAudio Member
 
analog_sa's Avatar
 
Join Date: Aug 2002
Location: Cascais
Quote:
Originally posted by Geek
You'll want to use the "High Performance" circuit option:

http://www.classicvalve.ca/tubepcb.html#CCS

Cheers!

Using high voltage parts? For a Dac?
  Reply With Quote
Old 17th August 2009, 08:19 AM   #5
Geek is offline Geek
diyAudio Member
 
Geek's Avatar
 
Join Date: Sep 2004
Heh, no, you don't have to

Come to think of it... I dunno if you'll have enough voltage to drive that circuit. Maybe Pinkmouse's CCS? It can run with much lower voltage.

Cheers!
  Reply With Quote
Old 17th August 2009, 12:12 PM   #6
woody is offline woody
diyAudio Member
 
Join Date: Jan 2002
Location: Tyrone Ga. U.S.A.
In 2007 AudioXpress had 2 articles by Walt Jung ( Audio Current
regulator test for high preformance) you might like to look at it. It is a real good read with lots of test results. Sorry you will have
to do your own google search for it.
  Reply With Quote
Old 17th August 2009, 03:24 PM   #7
jcx is offline jcx  United States
diyAudio Member
 
Join Date: Feb 2003
Location: ..
if you're using the app circuit with a diff to single ended converter (or using balanced diff out) you don't even need really low noise Vref for the Ioffset cancelling Rs - use matching R from the same -Vref and the -Vref noise is common mode and mostly rejected by the diff output

easiest likey would be op amp inverting the +5V analog for the (common) -Vref and using well matched, low noise R to the +,- Iouts

separatly derived, active ccs circuits will give noiser outptut than the resistor scheme described above

the I bais isn't necessarily a "heavy load", a constant current source has an "infinite" small signal resistance - it also assures Class A bias of the example circuit's NE5534 op amps' outputs which is a good thing for their dynamic impedance and linearity

to improve over the app circuit I would put a fast pnp transistor or cfa op amp as a output buffer inside the I/V feedback loop to get even lower feedback Z (and add ccs Class A bias to the 1st op amp output), using the Ibias of the pcm1794 as a free ccs load for Class A bias of the I/V output buffer
  Reply With Quote
Old 17th August 2009, 04:35 PM   #8
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Quote:
Originally posted by woody
In 2007 AudioXpress had 2 articles by Walt Jung ( Audio Current
regulator test for high preformance) you might like to look at it. It is a real good read with lots of test results. Sorry you will have
to do your own google search for it.
go to Walt Jung's site.
__________________
regards Andrew T.
  Reply With Quote

Reply


Any super current source?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


New To Site? Need Help?

All times are GMT. The time now is 06:22 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki