diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Replacement for NJM4580 (http://www.diyaudio.com/forums/solid-state/150213-replacement-njm4580.html)

EE 28th August 2009 07:10 PM

Replacement for NJM4580
 
In my amp there is a NJM4580 from JRC, one half being used as DC servo and the other as an input buffer for the amp. It is dead because of its zener supplynow being a short to the positive rail.

I cannot source any NJM4580. Is there a suitable replacement which can do both functions equally well? NE5532 (which I have plenty) maybe?

Regards

Nrik 28th August 2009 08:25 PM

If you really want NJM4558 then go to the scrapyard and pick up any ghettoblaster or cheap stereo.

Or You could just use your NE5532 and then you will experience much better sound quality.
But change the similar one in the other channel.

tiefbassuebertr 28th August 2009 08:27 PM

you can use a wide range of dual op amps
I would try the follow: OP-275 (Analog Devices), OPA-2132, OPA2604 and NE5532 (last three from TI)
please go also to
http://www.diyaudio.com/forums/showt...?postid=448316
Datasheet NJM4580:
http://akizukidenshi.com/download/NJM4580.pdf
Datasheet OP-275:
http://www.analog.com/static/importe...eets/OP275.pdf


All times are GMT. The time now is 04:13 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2