Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 23rd August 2009, 06:25 PM   #1
diyAudio Member
Join Date: Dec 2006
Default What problem with Nad C350 amp. Please help


I think somebody can help to sort the problem out.

My Nad C350 has no sound at all when connecting to the speakers. However, when I plug my headphone into the ''phones socket'', I can hear the sound normally.

Please help.

  Reply With Quote
Old 23rd August 2009, 07:02 PM   #2
alex mm is offline alex mm  Europe
diyAudio Member
alex mm's Avatar
Join Date: Mar 2006
Location: ROMANIA ,
Default phone socket ....

Hi Julio,

Try to change phone socket with an new one.

Regards alex mm .
  Reply With Quote
Old 23rd August 2009, 07:16 PM   #3
diyAudio Member
Join Date: Dec 2006
Originally Posted by alex mm View Post
Hi Julio,

Try to change phone socket with an new one.

Regards alex mm .
Hi Alex,

Thank you very much for your quick advice

However, there is abit misunderstood here.

I mean when I connect my speakers ( floor standing) to the amp ( at the rear side where there are speakers connection: Red, black....) there is no sound at all.

So I had to unpluged the speakers, then plug my head phone into the PHONES socket on the front side of the amp. I can hear music normally.

Please help
  Reply With Quote
Old 23rd August 2009, 08:44 PM   #4
diyAudio Member
Join Date: Aug 2005
Send a message via MSN to dj_vulture
Probably a blown fuse, open it and check if you do not want to send it to the repair shop... Otherwise check for burnt parts or PCB, it will give us clues to what happen
  Reply With Quote
Old 30th August 2009, 11:21 PM   #5
diyAudio Member
Join Date: Dec 2006
Hi Dj- Vulture,

Thanks for your advice

I did check the fuse and board. There is nothing wrong

I also disconnected the head phone, but the problem still remained

I think the Pre-amp section is still working and so does the Power section

The replay is still working properly.

I did research this site and found out Nad C350 has to be soldered ( jumper) for R... and R...
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Troubleshooting NAD C350 RobHance Solid State 16 17th September 2011 02:56 AM
Need help with NAD C350, protection! silversweden Solid State 0 19th January 2008 07:47 AM
Nad C350 burbeck Solid State 0 18th December 2007 02:32 PM
Tweak/mod NAD C350 Pound0sound Chip Amps 7 27th February 2004 10:49 AM
Tweak/Mod NAD C350 Pound0sound Solid State 0 9th February 2004 03:01 PM

New To Site? Need Help?

All times are GMT. The time now is 11:16 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2