JVC A-S3 service manual

RS232 · 30th May 2009, 09:25 PM

Can someone help ?
Was given one of these amps in very good/excelent cosmetic condition and in working order but it was repaired before (not to my standarts).
So I want to restore it to the original condition but for that I need the service manual.
Or it there someone with one of this that they whant to get rid off ?

Thanks
Ric

Westerp · 30th May 2009, 09:34 PM

http://www.analogalley.com/m_jvc_1.htm but I guess you already found that one.

RS232 · 30th May 2009, 10:58 PM

Hi.es i did and some others but I really don't whant to pay $20 for a manual that I'm going to use once.
The problem with this amp is that the volume pot was replaced with the wrong one (original had 8 legs ) this one is a normal 100k log with 2 trimpots on the side to make up for the missing 2 legs.

RS232 · 31st May 2009, 05:19 PM

Someone around here with a 8 leged pot in there junk box ?
You guys know the ones with a center tap + the normal 6 legs.
Don't know the exact value but a 50K or 100K will do.
Please contact me PM or email me at a.ricardo.p at googlemail.com.
Thanks
Ric

Westerp · 31st May 2009, 05:43 PM

Thread and axle size, length?

30th May 2009, 09:25 PM	#1
RS232 diyAudio Member Join Date: Jan 2006 Location: Swindon	JVC A-S3 service manual Can someone help ? Was given one of these amps in very good/excelent cosmetic condition and in working order but it was repaired before (not to my standarts). So I want to restore it to the original condition but for that I need the service manual. Or it there someone with one of this that they whant to get rid off ? Thanks Ric

30th May 2009, 09:34 PM	#2
Westerp diyAudio Member Join Date: Jan 2006 Location: Amsterdam	http://www.analogalley.com/m_jvc_1.htm but I guess you already found that one. __________________ http://tda1541a.com The Final List

31st May 2009, 05:43 PM	#5
Westerp diyAudio Member Join Date: Jan 2006 Location: Amsterdam	Thread and axle size, length? __________________ http://tda1541a.com The Final List

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AVR 210 Service Manual	dshambala	Solid State	2	26th September 2008 01:57 PM
Seek help: Leader LDM-171 user manual (Service Manual)	0451ym	Parts	0	28th June 2008 05:18 PM
A5 service manual	recife	Pass Labs	2	10th February 2007 02:04 PM
I need the Service Manual of WM-DC2.	micorpig	Analogue Source	0	8th December 2006 07:37 AM
Service manual	xcel	Digital Source	0	20th February 2005 12:59 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th May 2009, 10:58 PM	#3
RS232 diyAudio Member Join Date: Jan 2006 Location: Swindon	Hi.es i did and some others but I really don't whant to pay $20 for a manual that I'm going to use once. The problem with this amp is that the volume pot was replaced with the wrong one (original had 8 legs ) this one is a normal 100k log with 2 trimpots on the side to make up for the missing 2 legs.

31st May 2009, 05:19 PM	#4
RS232 diyAudio Member Join Date: Jan 2006 Location: Swindon	Someone around here with a 8 leged pot in there junk box ? You guys know the ones with a center tap + the normal 6 legs. Don't know the exact value but a 50K or 100K will do. Please contact me PM or email me at a.ricardo.p at googlemail.com. Thanks Ric

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read