|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
28th April 2009, 11:55 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2008
|
Acoustic 160 adjustments
Anybody have the alignment procedure for an old Acoustic 160 guitar amp? I just replaced ALL 43 electrolytics in it. It's up and running but need to check the adjustments, there are three. I know what two of them are but don't where to measure or voltage, the third is on the input diff. I am hoping one of you has this info before I fork over $ for a service manual that I'll probably never use again.
Craig |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| X-5 bias adjustments | ROLIKOV | Pass Labs | 3 | 11th December 2008 09:49 PM |
| D1 Volume adjustments | hifimaker | Pass Labs | 11 | 19th October 2007 10:18 PM |
| Fender Adjustments | JDeV | Tubes / Valves | 6 | 7th April 2006 08:17 PM |
| Plate amp EQ adjustments? | mike.e | Subwoofers | 7 | 7th June 2005 06:50 PM |
| trim pot adjustments | walters9515 | Instruments and Amps | 0 | 26th April 2005 09:28 PM |
| New To Site? | Need Help? |
| Page generated in 0.05460 seconds (69.16% PHP - 30.84% MySQL) with 10 queries |
