TGM Amplifier ? - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th March 2009, 10:44 PM   #1
Bigun is offline Bigun  Canada
diyAudio Member
 
Bigun's Avatar
 
Join Date: Jan 2009
Blog Entries: 2
Default TGM Amplifier ?

My first thread in this forum... how to begin

I want to build an amplifier and know how it works. I have never done this before but I do enjoy starting something new, learning and researching and designing. Eventually building. But I can't start with a plan that will last longer than a few weeks in case I run out of steam or get distracting by the summer... I'm looking for some encouragement from the forum to pull me through ;-)

My excuse is that I'm making a Home Theatre system (DIY HT speakers done already) so I need 5 channels and it has to be musical. I want the future option to bridge channels to allow drive my stereo speakers too. I was tempted to buy AKSA 55 but it's no longer for sale and you can't build it yourself anymore - only fully assembled. Hugh was very kind about it. I have started from AKSA-like schematics found in this forum - I understand they are not the 'real' ones but they are at least in the public domain.

So I read many posts in this forum and my interest settled clearly on a discrete SS amp (although very tempted by Susan Parker Zeus amplifier). My interest quickly drawn to the GEM, DX, AKSA bootstrap family. I'm trying to understand how they work, last week I read about p-n junctions, this week about bootstrapping, long-tailed pairs and Miller capacitance. If I copy one of these excellent amplifier designs I can benefit from all that has gone before, but it will not be mine and that will make me lazy to understanding how they work.

I have to learn about design and see if you guys have the patience to go over old ground again with yet another design that looks so very familiar. I will build it; first step is to order parts, beg/borrow a dual bench supply (or I have to build it) and scope.

EDIT:

Here is the final incarnation of the amp, starts at post 349, with photos at post 354

TGM Amplifier ?

Final schematic is attached at post 356

TGM Amplifier ?
Attached Images
File Type: gif tgm_1v0.gif (77.6 KB, 4959 views)
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.

Last edited by Bigun; 28th November 2012 at 12:00 AM.
  Reply With Quote
Old 15th March 2009, 12:18 AM   #2
diyAudio Member
 
nigelwright7557's Avatar
 
Join Date: Apr 2008
Location: Carlisle, England
I dont think c4b is required.

Not quite sure you need 100R resistors in paralell with fuses.


I would have used a constant current cct in series with the VAS.
The bias cct seems a bit odd to me.
__________________
PCBCAD50 software. http://www.murtonpikesystems.co.uk
  Reply With Quote
Old 15th March 2009, 12:18 AM   #3
diyAudio Member
 
ostripper's Avatar
 
Join Date: May 2008
Location: Albany , NY (smallbany)
What's up. bigun... Sorry to say, that won't work.. but
(attached) is as close to your schema that will.

1. not enough current across T1/2 , 10k for R3 solved that.
(1.4ma per device)
2 . no degeneration on T1/2 .. too much gain , also R9/1
too high. ( amp produced a square wave with 1v input).

3. I used 100pF for C5 (safe) and r15 way too low.. 100R
is better.

Many refinements can be added to this classic topology
like a constant current source for the input pair,
negative feedback compensation, input RC filter...etc.


OS
Attached Images
File Type: gif runs.gif (14.5 KB, 4175 views)
  Reply With Quote
Old 15th March 2009, 02:31 AM   #4
Bigun is offline Bigun  Canada
diyAudio Member
 
Bigun's Avatar
 
Join Date: Jan 2009
Blog Entries: 2
doesn't work?

Thanks very much for taking the trouble to look at this OS. These are just the things I want to learn, but I'm worried I'm going to be sent off to buy a big book on the topic shortly, so let me ask a question...

My aim is to build something as simple (in terms of part count) as the ASKA 55 so I started with a schematic similar to it (the real one being unavailable). So I assume that after some learning and refining of the schematic I then build something on proto-board and play with it to see what affects it's performance (most importantly by listening to it). If I can get to a decent result (for me this means smooth hi frequencies) like this then I'll be happy. How would you compare this approach with the option of building the DX (proven design) where I don't have to ask a dozen questions on this forum on a daily basis and then playing with the prototype of that as an alternative way to reach my goal ??

By the way - why do you want separate emitter resistors on the LTP ?

You also recommended different devices from AKSA - is this because you have them set up in your modelling software or because they are easier to obtain ?

Many thanks...
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.
  Reply With Quote
Old 15th March 2009, 03:09 AM   #5
diyAudio Member
 
ostripper's Avatar
 
Join Date: May 2008
Location: Albany , NY (smallbany)
Quote:
doesn't work?
it's not your fault ..68k would of worked at + - 70 rails, but
not at 35v..

you should download...

http://www.linear.com/designtools/software/ltspice.jsp
build your own..
Quote:
You also recommended different devices from AKSA
aska is a "master" ,BUT... there are certain combinations
of components that just will not work , real or simulated.
a mje340/bd139/ or the 2sc XXX have similar characteristics,
but to make a ideal circuit you would have to choose
one of them (especially for main VAS).

OR , as others suggest, jusy build it, burn many transistors,
and learn "the hard way"...
OS
  Reply With Quote
Old 15th March 2009, 03:23 AM   #6
diyAudio Member
 
ostripper's Avatar
 
Join Date: May 2008
Location: Albany , NY (smallbany)
To explain fully, a simulated circuit will just about always
work.. without "blowing up" , but , how it will sound
cannot be fortold by just simulation.
os
  Reply With Quote
Old 15th March 2009, 01:36 PM   #7
Bigun is offline Bigun  Canada
diyAudio Member
 
Bigun's Avatar
 
Join Date: Jan 2009
Blog Entries: 2
It's a sunny morning and I have a week off work, time to 'go to amplifier school'

OS,

being an iMac person I can't use that spice software but I've found something that looks to be equivalent at http://www.macspice.com/ and the I'll start to look at this LTP section further. I had drawn it with only 0.5mA running through and I don't know why this is bad (yikes). Also, I am to learn from reading about SS vs tubes that the secrets are in the distortion characteristics. There are people who say even order harmonics are better than odd and others who say this is nonsense, but either way I should like to learn how the design can impact distortion at some point - i.e. what happens when the design is less 'ideal'.

Nigel,

The extra bootstrap capacitor was shown that way as I have read it is a 'known improvement' to the AKSA amplifier, using special high-quality Blackgate capacitors. Perhaps not the starting point for me - wait until I have something running before I try this. The resistors with the fuses have a purpose which I can't remember ! - there's a post discussing this somewhere between Pavel and AKSA...
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.
  Reply With Quote
Old 15th March 2009, 02:04 PM   #8
Account disabled at member's request
 
MJL21193's Avatar
 
Join Date: Mar 2007
Quote:
Originally posted by Bigun
I had drawn it with only 0.5mA running through and I don't know why this is bad (yikes).

Hi,
You'll want to look at the device specs to see where (current draw wise) it will operate best. For the 2N5401 it's in the range of 2-10mA. You need to keep an eye on dissipation too, not to run the device too hot. 3-4mA at your rails would be fine.
  Reply With Quote
Old 15th March 2009, 02:51 PM   #9
diyAudio Member
 
ostripper's Avatar
 
Join Date: May 2008
Location: Albany , NY (smallbany)
Macspice should work good,BG.
just find the .models and copy/paste.
I did finish your amp.. added a current source.
with aksa's 22p ..the amp has a very good loop gain response
(won't oscillate) with 10-22R for the 2 tail resistors (t1/2)
you have enough total open loop gain 45db+
and 27k for input and feedback give enough closed loop gain.

(attached) does very well and should also sound nice.
edit: you might want to increase C3 (22u) to 100u,
less offset at output.

OS
Attached Images
File Type: gif tmg.gif (19.4 KB, 3770 views)
  Reply With Quote
Old 15th March 2009, 03:07 PM   #10
Bigun is offline Bigun  Canada
diyAudio Member
 
Bigun's Avatar
 
Join Date: Jan 2009
Blog Entries: 2
It's amazing how helpful you guys are

MacSpice3f5 - installed


But the kids are finally changing out of their PJ's so will have to delay for a couple of hours for family brunch and tiling work in the basement...
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: DIY amplifier builder with experience. I need a 0.7 ohm stable amplifier Audiophilenoob Swap Meet 34 16th May 2005 11:58 PM
Questions about how to decrease the PASS A-40 amplifier into a class AB amplifier. novtango Pass Labs 2 21st October 2002 01:50 AM


New To Site? Need Help?

All times are GMT. The time now is 01:32 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2