diyAudio (
-   Solid State (
-   -   HELP! Caps replaced-fuzzy sound (

sondguy 6th March 2009 02:20 AM

HELP! Caps replaced-fuzzy sound
I replaced 2 16000uf PS caps in a Bedini 801 amp with Cornell Dubilier 33000uf. Both are rated @ 75VDC. Amp was quiet when 1st turned on. I put a cd in & got sound out of Rt channel & only a little static out of LF side, no music. I turned amp off & then on again & the rt channel began to distort. Immediately turned it off. I bought the caps on EBAY on EBAY over a year ago which were represented to be NEW!

CD- Part no is 500333u075cd2bnt HOPE THIS HELPS IN DIAGNOSTICS!

h_a 6th March 2009 10:11 AM


check the connections to the caps (screw terminals? solder joints?). If ok, fit again the old caps to check wether it's really the caps that cause the problems ;)

Have fun, Hannes

All times are GMT. The time now is 03:49 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2