10n16/10p16

tnc · 28th February 2009, 07:37 PM

Does anyone know if i can use 10N16/10P16 as direct substitute for 2SK135/2SJ50 without any modification. Would it sound better/worse.... Thanks.

megajocke · 1st March 2009, 02:52 PM

Which 10n16/10p16?

Is it the Exicon ones or something else? The Exicon parts should work. Gate resistor values might need to be experimented with though for best results.

tnc · 3rd March 2009, 02:01 AM

Yes Megajocke, I was referring to the Exicon. If these are direct substitute, I will get a couple pairs to fix my amp; Many thanks.

28th February 2009, 07:37 PM	#1
tnc diyAudio Member Join Date: Feb 2009	10n16/10p16 Does anyone know if i can use 10N16/10P16 as direct substitute for 2SK135/2SJ50 without any modification. Would it sound better/worse.... Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS 2 pairs Exicon 10P16 and 10N16	ianfromnotts	Swap Meet	1	25th June 2008 04:14 AM
Exicon 10n16 / 10p16 vs Magnatec BUZ900/905	hihopes	Solid State	4	29th September 2007 10:59 AM
Replacement transistor Exicon 10P16 and 10N16 by 2SJ50 and 2SK135	tdrenne	Parts	0	20th January 2004 09:14 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st March 2009, 02:52 PM	#2
megajocke diyAudio Member Join Date: Jan 2003 Location: Solna	Which 10n16/10p16? Is it the Exicon ones or something else? The Exicon parts should work. Gate resistor values might need to be experimented with though for best results.

3rd March 2009, 02:01 AM	#3
tnc diyAudio Member Join Date: Feb 2009	Yes Megajocke, I was referring to the Exicon. If these are direct substitute, I will get a couple pairs to fix my amp; Many thanks.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)