Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Dynacord power mate 1000mk1
Dynacord power mate 1000mk1
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th January 2009, 10:04 PM   #1
amptech is offline amptech  Scotland
diyAudio Member
Join Date: Jan 2009
Location: Glasgow
Send a message via MSN to amptech
Default Dynacord power mate 1000mk1

Hello all,

This mixer amp was a pain in the neck to get up and running again!

The owner 'droped his drink on the master level silders, nice
His comments where ' it's weak to one to one side and the limit led is on all the time, mmmm!

Well it took lots of part replacements and not for getting non stop call's asking 'is it fixed yet, my reply 'stop calling me asking the same thing
if you chaps ever get one with the limit led on and weak to one side, go to the o/p stage and left pin 5 on the lm3080n ic and your regain good power level to the weak side so long as the o/p stage is working as it should be. next check around the limiter circuit and your see a 2.4 zener diode and right next to it there's a 220k resistor that's o/c and replacement soon as limiter working again. If any of you need a diagram for this monster mixer amp, polaraudio in the uk will be happy to help.
  Reply With Quote


Dynacord power mate 1000mk1Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynacord eminent 100 pigsnoot Solid State 6 13th June 2009 09:55 PM
Dynacord MV46 as a compressor fredriksweden Instruments and Amps 1 1st June 2009 11:26 AM
dynacord echocord s65 jaguarecho Parts 0 1st March 2009 05:01 PM
Yamaha RX-497 + 4x Dynacord DL92 GezaazY Parts 3 30th June 2007 06:01 PM
Dynacord amps? millwood Solid State 1 23rd September 2003 02:28 PM

New To Site? Need Help?

All times are GMT. The time now is 01:57 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio