|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
4th January 2009, 09:40 AM
|
#1 |
|
diyAudio Member
Join Date: May 2007
|
Power switch for B&O 1000asp.
Hi guys.I have the B&O 1000asp and want to build a mono block can anyone tell me if this switch is ok for Australia's 240 volt power.And what about the led does it need anything resistor etc' to protect it from the 240 volt mains.Thx.
http://www.gammods.com.au/store/ind...products_id=346 A person{Nisbeth} from this site said it's not suitable,he says I need 10 amps.Has anyone got any ideas where I can get that type of switch from.Thx .I am in Australia. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| IcePower 1000ASP Wanted | toufu | Swap Meet | 0 | 8th July 2009 11:59 PM |
| B&O 1000asp amplifiers | lazenna | Solid State | 8 | 1st December 2008 02:58 PM |
| Adding a 12V power trigger switch to Electrocompaniet Power Amp | maxzimum | Solid State | 0 | 11th April 2008 01:54 PM |
| Ice power 1000ASP | Sundance | Class D | 2 | 25th September 2006 07:29 AM |
| Using a momentary switch for main power switch? | FullThrottleRic | Parts | 9 | 25th June 2002 08:23 PM |
| New To Site? | Need Help? |
| Page generated in 0.09283 seconds (63.63% PHP - 36.37% MySQL) with 10 queries |
