diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Marantz MR 250L backlight gone (http://www.diyaudio.com/forums/solid-state/135176-marantz-mr-250l-backlight-gone.html)

dayking79 20th December 2008 06:58 PM

Marantz MR 250L backlight gone
 
Hi there,

anybody have any ideas on how to get to the backlight on a Marantz MR 250L amplifier. It has a blue illumination but mine has gone:bawling:

There is no illumination at all apart from the red LED that tells you when receiving stereo from tuner section.
I think it is a fuse but it seems so difficult to get to anything behind the front panel.
Thank you.

Mooly 21st December 2008 10:25 AM

2 Attachment(s)
Is it like this, not that I have ever seen one. If so it's a careful, methodical strip down. Most probably a bulb, they are probably in series.

dayking79 21st December 2008 01:11 PM

Yes that is the one. I will have to do the big strip down thing then.:cannotbe:

Mooly 22nd December 2008 06:48 AM

A lot of Jap gear like this should have the bulbs in sockets for replacement. Getting the correct ones may be a problem, you will have to see what is in there first.
If it is a stripdown, it's just a case of being carefull. Front off, carefully removing any knobs etc ( check for grub screws first ) and keeping a note of any different screw types.
Stuff like this usually comes apart a treat and is a good opertunity to clean it all up, the faceplate behind the glass etc.
Good luck :)


All times are GMT. The time now is 08:10 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2