I found these.
Ultra-Low ESR Solid Aluminum Electrolytic Capacitors (NSPZR Series)
100KHz ESR = 0.008ohm
100KHz RCR = 5.500Arms
Capacitance Values = 180 ~ 820uF
Voltage Ratings = 4 ~ 16VDC
Sizes = 8 & 10mm Diameters
* - Lowest ESR of Radial Leaded Types
Lead (Pb) AND PVC FREE CONSTRUCTION
NEW!
FEATURES
• LOWEST ESR & HIGHEST RIPPLE CURRENT AT 100KHz
• CAPACITANCE VALUES UP TO 820mF
• 8x11.5mm ~ 10x12.5mm CASE SIZES, RADIAL LEADED
• Lead (Pb) AND PVC FREE CONSTRUCTION
• SOLID ELECTROLYTE
There is a limited range of values, and mostly suitable for digital and preamp stuff.
Solid electrolyte sounds like they won't dry out, and they don't need skinning.
Anybody tried stuff like this ?.
Eric.
Ultra-Low ESR Solid Aluminum Electrolytic Capacitors (NSPZR Series)
100KHz ESR = 0.008ohm
100KHz RCR = 5.500Arms
Capacitance Values = 180 ~ 820uF
Voltage Ratings = 4 ~ 16VDC
Sizes = 8 & 10mm Diameters
* - Lowest ESR of Radial Leaded Types
Lead (Pb) AND PVC FREE CONSTRUCTION
NEW!
FEATURES
• LOWEST ESR & HIGHEST RIPPLE CURRENT AT 100KHz
• CAPACITANCE VALUES UP TO 820mF
• 8x11.5mm ~ 10x12.5mm CASE SIZES, RADIAL LEADED
• Lead (Pb) AND PVC FREE CONSTRUCTION
• SOLID ELECTROLYTE
There is a limited range of values, and mostly suitable for digital and preamp stuff.
Solid electrolyte sounds like they won't dry out, and they don't need skinning.
Anybody tried stuff like this ?.
Eric.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.