Adcom 585 problems 1 side hot other cold?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Well I did a large amount of work to this amp, and the boards have been cleaned, and all the caps replaced(thanks Chris). The DC offset is well within spec, and the bias is set to 24mv. Every thing is good except one heat sink is pretty hot, and the other is very cool. Also the 680r on the soft start board is very hot. You can not leave your finger on it. You can barely touch it! Both channels play, but I am not running it know out of concern.
Thanks
Ben
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.