HI ! Guys
Some info .
Very Very Good Free PCB CAD soft is here
At first
I using the Schematic editor and Library editor BSch3V,
http://www.suigyodo.com/online/e/index.htm
then I study PCB CAD editor MBE (Minimal Board Editor) in same site
http://www.suigyodo.com/online/mbe/mbe.htm
(It is only Japanese yet.....)
It can make Gerver data, 4 layer support ,300mm×300mm OK.
It is License GPL.
THANK YOU SUIGYODO!! Very much!
Caution!
I have not made PCB by this yet .now on studying....
So it may some mistake , So sorry..
But I want to info this great Free soft for all...
thank you!
Some info .
Very Very Good Free PCB CAD soft is here
At first
I using the Schematic editor and Library editor BSch3V,
http://www.suigyodo.com/online/e/index.htm
then I study PCB CAD editor MBE (Minimal Board Editor) in same site
http://www.suigyodo.com/online/mbe/mbe.htm
(It is only Japanese yet.....)
It can make Gerver data, 4 layer support ,300mm×300mm OK.
It is License GPL.
THANK YOU SUIGYODO!! Very much!
Caution!
I have not made PCB by this yet .now on studying....
So it may some mistake , So sorry..
But I want to info this great Free soft for all...
thank you!
MBE sample
Hi Ostripper
Some info I studied....
MBE is use ".NET Framework " Install is by WIN update ,
then custum add...(VISTA is not need this install )
About the LIB: MBE don't use special editor , using "*.mb3" file selfmake.
SET-> Library ->Set library Form
Library manual
http://www.suigyodo.com/online/mbe/manual/edit/edit.htm#COMPONENT
(Sorry Japanese only.... but some picture is there.
and WIN standerd control almost)
attach a sumple LIB I studied ( this is not perfect) .
other some manual
http://www.suigyodo.com/online/mbe/manual/cmdtool/cmdtool.htm
http://www.suigyodo.com/online/mbe/mbedoc.htm
http://www.suigyodo.com/online/mbe/manual/cmdtool/cmdtool.htm#COMPONENT
http://www.suigyodo.com/online/mbe/manual/file/file.htm
http://www.suigyodo.com/online/mbe/manual/file/file.htm#SETUPPAGE
Regards
Hi Ostripper
Some info I studied....
MBE is use ".NET Framework " Install is by WIN update ,
then custum add...(VISTA is not need this install )
About the LIB: MBE don't use special editor , using "*.mb3" file selfmake.
SET-> Library ->Set library Form
Library manual
http://www.suigyodo.com/online/mbe/manual/edit/edit.htm#COMPONENT
(Sorry Japanese only.... but some picture is there.
and WIN standerd control almost)
attach a sumple LIB I studied ( this is not perfect) .
other some manual
http://www.suigyodo.com/online/mbe/manual/cmdtool/cmdtool.htm
http://www.suigyodo.com/online/mbe/mbedoc.htm
http://www.suigyodo.com/online/mbe/manual/cmdtool/cmdtool.htm#COMPONENT
http://www.suigyodo.com/online/mbe/manual/file/file.htm
http://www.suigyodo.com/online/mbe/manual/file/file.htm#SETUPPAGE
Regards
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.