diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Building A new amplifier (http://www.diyaudio.com/forums/solid-state/132917-building-new-amplifier.html)

steevo 10th November 2008 06:02 PM

Building A new amplifier
 
I am thinking about designing a new amplifier, based on Quad crrent dumping/feedforward amplifier. Reference the following article
"Feedforward Error Corrections in Audio Power Amplifier" by John Vanderkooy and Stanley P. Lipshitz. Instead of using quads simple class A control amplifier I am thinking of using a class mirror topolgy and to design a low power very low distortion high speed class A amplifier to control the ouput dumper, based on Randys slone work and doug self work from there books, this should give me superior SN ratio compared to quad class A deisgn, I am not sure what type of output to use though, ie biopolar emitter follower. Has anyone desinged a similar amplifier based on the feed forward deisgn.

Steevo


All times are GMT. The time now is 04:44 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2