|Solid State Talk all about solid state amplification.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|2nd April 2003, 06:05 AM||#1|
Join Date: Mar 2003
Lost in [net]space
I'm searching parts for my future amp - probably some kind of leach superamp mutation - yappp - output transistors. I've been comparing parameters of many of them and I'm confused - why there are so many types
Does it make audible difference if I use different transistors but with comparable parameters ?
So I'm going to use this selection:
- VCE or second breakdown voltage at least two times grater than suplay voltage
- Ic let say 15A or more
- power dissipation 200W or more
I think that it is OK, isn't it?
I'm bit afraid about 500pF capacitance of high power transistors - I'm going to use BJT. Would it be better if I used several paraller transistors with less power but also with less capaticance ?
I found that MJL21193 from OnSemi (and its complementary) available as a samples meet my expectations.
|2nd April 2003, 07:27 PM||#3|
diyAudio Moderator Emeritus
Join Date: Jan 2003
I'm not familiar with the leach amp, but I know the MJL21193/4
are very decent transistors.
Can you post a schematic of your mutation? This could help a lot.
Perform a search on this forum; it also will reveal a lot of help.
Anyway, your thread is on top again.
Leach specialist will help you soon.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|I need space.||kiowamec||Multi-Way||3||22nd May 2006 06:26 AM|
|My new space heater||MEGA_amp||Pass Labs||13||23rd December 2005 03:38 AM|
|lost in space||JRKO||Introductions||2||26th December 2003 11:44 PM|
|Not enough space?||WhtCastle||Everything Else||7||28th November 2001 02:46 PM|
|New To Site?||Need Help?|