My amp is completed !
 

This is my DIY amp. 2*100 w (in 8 ohms load). It's a Zenquito amplifier, the schematic, which can be find

here:http://perso.wanadoo.fr/jm.plantefeve/sche.html

is rellay simple and provides to this amplifier a really good sound.

The sound is really amazing, for only 300$, it's the best amp I never heard.

And now, some pics:

The rear side.

one last.

Hi SDF,

Great job!
You'r really good!
I'v seen also on the last pic. that you have a Meridian underneath your amp. Does it run hot? If so, you better put the amp on a separate shelf!

Ones again very nice! congrats!

Audiofanatic ;)

Lovey construction, SDF!

Did you make those PCBs yourself? Also, what is the VA rating of that transformer?

See ya,
Tim.

looks cool :bigeyes:

Its quite nice looking. If you could translate a few more details please.

At 100 watts I assume its AB configuration.

Those chokes on the outputs are wonderful, how did you calculate and fabricate them?

Congratulations.

What advice would you have for any of us who might want to follow in your footsteps?

A translation by google:
http://translate.google.com/translat...8%26oe%3DUTF-8

First thank all :)

Audiofanatic :

Concerning the Meridian CD player under this amp, it's not a problem, it's hot but the heat go up so the cd player stay cold.
More It stand on another shelf.

trwh:

The power rating is 500VA, it's an encapsulated toroid by Nuvotem-Talema. In the target to grow down the wires,I designed my own PCB

Da5id4Vz:

If Ishould give an advice concerning this construction, you should not used a 2*35Vac transformer but 2*30Vac or even 2*25Vac because it's really enough.

This amp is of course a class ab amplifier which biased about 110 mA by device so 232 mA by chanel (second stage required 10 mA and the first 2mA).

The output shoke is approximatively 1 µH, 10 rounds of 20 mm radius give it.

Looks real good. Everything is nice and tidy. Congrats and happy listening!

Thank seangoesbonk

For the interesting people, my speaker associate with this amp is here :

http://www.diyaudio.com/forums/showt...375#post154375