diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   A400x volum pot clean? (http://www.diyaudio.com/forums/solid-state/129996-a400x-volum-pot-clean.html)

Huchiz 18th September 2008 07:55 PM

A400x volum pot clean?
 
Another issue,
I do found the volum potentiometer has a bit of noise on the left channel. I want to clean it, but don't want to de-solider it if possible. Will this spary solvent work? http://www.jaycar.co.nz/productView...eMax=&SUBCATID=

Huchiz 19th September 2008 01:56 AM

It says:
A blend of non- CFC solvents and RF contact treatment oil. Ideal for cleaning and lubricating non- arcing contacts and mechanisms. Can be used for cleaning & lubricating all types of contacts.Safe on most plastics.

Link: http://www.jaycar.co.nz/productView....Max=&SUBCATID=

rabbitz 19th September 2008 07:23 PM

You only want to clean so use the one without the lubricant.

NA1004 from Jaycar
http://www1.jaycar.com.au/productVie...Max=&SUBCATID=

or T3066 from Altronics
http://www.altronics.com.au/index.as...=item&id=T3066

I recently cleaned a pot on a A400X and used the first one listed.

Huchiz 19th September 2008 09:44 PM

I was thinking the cleaning solvent withour lube will clean out all the oil in the pot, so I tried the cleaner with lube. And it works. Thanks.


All times are GMT. The time now is 05:06 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2