mission cyrus 2 PSX

bonjaribros · 30th July 2008, 01:22 PM

I live in the mountains in the SE of France, with a round trip of over 250 miles to the nearest Mission outlet. I have a Mission Cyrus2 amp and a PSX but do not know what to do to get the PSX working ! I know it involves removing some fuses from the Cyrus2, as I've had this combination since 1985 and saw it done back the, however my old one blew (big time ) and I've bought the new pair over the net. Can anyone help ?

AndrewT · 30th July 2008, 02:13 PM

open it up and post a close up of the PCB.

Geoff · 30th July 2008, 02:56 PM

If you bought the amp and PSX together then it is more than likely that the necessary change will already have been done, but it is as well to check before powering up.

Open up the amp and remove (if they are fitted) the fuses labeled FS1 and FS2 (next to the heatsink at the transformer end).

There is no need to connect a power cord to the amp unless you are using the phono stage.

bonjaribros · 31st July 2008, 09:36 PM

Thank you all, in particular Geoff, for your very helpful advice. I now have my system up and running as it should (god help the neighbours ! ). Knowing that I've avoided a full days driving and the costs involvged puts a very big smile on my, and my wife(s face

Geoff · 31st July 2008, 10:28 PM

I'm glad you've got it sorted. :-)

30th July 2008, 01:22 PM	#1
bonjaribros diyAudio Member Join Date: Jul 2008	mission cyrus 2 PSX I live in the mountains in the SE of France, with a round trip of over 250 miles to the nearest Mission outlet. I have a Mission Cyrus2 amp and a PSX but do not know what to do to get the PSX working ! I know it involves removing some fuses from the Cyrus2, as I've had this combination since 1985 and saw it done back the, however my old one blew (big time ) and I've bought the new pair over the net. Can anyone help ?

30th July 2008, 02:13 PM	#2
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	open it up and post a close up of the PCB. __________________ regards Andrew T.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mission cyrus 2 l/h channel low volume	Durro1	Solid State	4	10th March 2008 02:48 AM
Broken Mission Cyrus II - HELP	bernard boulet	Solid State	8	5th February 2007 10:56 AM
Mods on Mission Cyrus One	Ciu	Solid State	1	30th December 2005 08:56 PM
schematic mission cyrus II	roebas	Solid State	3	24th April 2004 09:18 AM
Mission-Cyrus PSX circuit	Will	Solid State	5	27th November 2002 02:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th July 2008, 02:56 PM	#3
Geoff diyAudio Member Join Date: Apr 2001 Location: UK	If you bought the amp and PSX together then it is more than likely that the necessary change will already have been done, but it is as well to check before powering up. Open up the amp and remove (if they are fitted) the fuses labeled FS1 and FS2 (next to the heatsink at the transformer end). There is no need to connect a power cord to the amp unless you are using the phono stage.

31st July 2008, 09:36 PM	#4
bonjaribros diyAudio Member Join Date: Jul 2008	Thank you all, in particular Geoff, for your very helpful advice. I now have my system up and running as it should (god help the neighbours ! ). Knowing that I've avoided a full days driving and the costs involvged puts a very big smile on my, and my wife(s face

31st July 2008, 10:28 PM	#5
Geoff diyAudio Member Join Date: Apr 2001 Location: UK	I'm glad you've got it sorted. :-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)