Electrocompaniet Preampliwire I manual (I am not in the sinbin)

browser · 30th July 2008, 04:03 AM

I have an Electrocompaniet Preampliwire I with onboard MC phono stage. However, the manuals for my hi-fi equipment were lost by the furniture removal company when I moved house recently. If anyone has a copy of the manual I would really appreciate it.

The bit I really need is the section which explains how to switch the preamp from MC to MM by removing the phono board, then installing capacitors and resistors in its place. There is also a method for increasing the gain of the phono stage by changing plug-in resistors. Lastly, there is the section on how to change the MC phono stage feedback resistors to suit different cartridges such as Denon, Ortofon or Van den Hul.

BTW, I am not in the sinbin (I was put in the sinbin due to an administrative error, not because I broke forum rules at any time). I have decided to repost the thread as being in the sinbin may have given other users a bad impression of me.

For further details on the sinbin mistake, check out this link to the relevant explanation by diyaudio.com moderator Cal Weldon.

lineup · 30th July 2008, 04:16 AM

I noticed this unfortunate mistake.
Credits to Cal Weldon fix this so quickly.
Good moderator job and action

--------------------

Electrocompaniet Preampliwire I
with onboard MC phono stage

The Manual lost. I am sure some one will send you!
Did you search forum for:
Electrocompaniet PreAmpliwire

I am quite sure this amplifier has been discussed.
If you are lucky, some topic has got an attached schematic.
Regards, Lineup

browser · 30th July 2008, 10:05 AM

Yes, I did a search. No-one has discussed the phono stage. Some diyaudio.com users have the user manual, but I was unable to contact them because I am a new user who has not made many posts. I have just sent an email to another diyaudio.com user, doanh, as he has (or had) the manual. (I am now able to send emails to other users because I have made several posts).

doanh · 31st July 2008, 08:45 PM

check your email. you should have the manual.

I apologize to other users who also asked me a while back for the manual. It took a while to search thru all the boxes to find it.

Zen Mod · 31st July 2008, 09:00 PM

Quote:

Originally posted by doanh
check your email. you should have the manual.

I apologize to other users who also asked me a while back for the manual. It took a while to search thru all the boxes to find it.

doanh

tnx for received manual from other thread , and I really mean - tnx !!

can you send me this one , too ?

>sasica5@gmail.com<

doanh · 31st July 2008, 09:10 PM

check your email.

Zen Mod · 31st July 2008, 09:16 PM

Quote:

Originally posted by doanh
check your email.

homemodder · 31st July 2008, 09:56 PM

Hi Doanh

Could i have a copy too?? What is the diffirence between ampliwire and EC1???

From the other thread I understood you had one of these and would part with it ????
A couple of months back I managed to purchase a Aw250 amp in perfect condition, very good sounding amp, a EC preamp to go with it would be nice.

Alex

doanh · 31st July 2008, 10:08 PM

send me an email address.

homemodder · 31st July 2008, 10:42 PM

My email is alexmiguel33@hotmail.com.

I have family living in Newark, woud you send it there, or maybe could they pick it up from you?? Is it still in good order?? Name your price??

30th July 2008, 04:03 AM	#1
browser diyAudio Member Join Date: Dec 2004 Location: Melbourne	Electrocompaniet Preampliwire I manual (I am not in the sinbin) I have an Electrocompaniet Preampliwire I with onboard MC phono stage. However, the manuals for my hi-fi equipment were lost by the furniture removal company when I moved house recently. If anyone has a copy of the manual I would really appreciate it. The bit I really need is the section which explains how to switch the preamp from MC to MM by removing the phono board, then installing capacitors and resistors in its place. There is also a method for increasing the gain of the phono stage by changing plug-in resistors. Lastly, there is the section on how to change the MC phono stage feedback resistors to suit different cartridges such as Denon, Ortofon or Van den Hul. BTW, I am not in the sinbin (I was put in the sinbin due to an administrative error, not because I broke forum rules at any time). I have decided to repost the thread as being in the sinbin may have given other users a bad impression of me. For further details on the sinbin mistake, check out this link to the relevant explanation by diyaudio.com moderator Cal Weldon.

30th July 2008, 04:16 AM	#2
lineup diyAudio Member Join Date: Dec 2005 Location: the north	I noticed this unfortunate mistake. Credits to Cal Weldon fix this so quickly. Good moderator job and action -------------------- Electrocompaniet Preampliwire I with onboard MC phono stage The Manual lost. I am sure some one will send you! Did you search forum for: Electrocompaniet PreAmpliwire I am quite sure this amplifier has been discussed. If you are lucky, some topic has got an attached schematic. Regards, Lineup __________________ lineup

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Electrocompaniet Preampliwire I/Preampliwire II manual	browser	Solid State	1	24th March 2012 09:49 AM
Electrocompaniet MC-2 manual (I am not in the sinbin)	browser	Solid State	1	30th July 2008 08:12 AM
Electrocompaniet Preampliwire I manual	browser	Solid State	1	30th July 2008 03:54 AM
Elcomp Preampliwire	ManUtd	Solid State	2	26th September 2003 05:20 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th July 2008, 10:05 AM	#3
browser diyAudio Member Join Date: Dec 2004 Location: Melbourne	Yes, I did a search. No-one has discussed the phono stage. Some diyaudio.com users have the user manual, but I was unable to contact them because I am a new user who has not made many posts. I have just sent an email to another diyaudio.com user, doanh, as he has (or had) the manual. (I am now able to send emails to other users because I have made several posts).

31st July 2008, 08:45 PM	#4
doanh diyAudio Member Join Date: Mar 2005 Location: Michigan	check your email. you should have the manual. I apologize to other users who also asked me a while back for the manual. It took a while to search thru all the boxes to find it.

31st July 2008, 09:10 PM	#6
doanh diyAudio Member Join Date: Mar 2005 Location: Michigan	check your email.

31st July 2008, 09:56 PM	#8
homemodder diyAudio Member Join Date: May 2006	Hi Doanh Could i have a copy too?? What is the diffirence between ampliwire and EC1??? From the other thread I understood you had one of these and would part with it ???? A couple of months back I managed to purchase a Aw250 amp in perfect condition, very good sounding amp, a EC preamp to go with it would be nice. Alex

31st July 2008, 10:08 PM	#9
doanh diyAudio Member Join Date: Mar 2005 Location: Michigan	send me an email address.

31st July 2008, 10:42 PM	#10
homemodder diyAudio Member Join Date: May 2006	My email is alexmiguel33@hotmail.com. I have family living in Newark, woud you send it there, or maybe could they pick it up from you?? Is it still in good order?? Name your price??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)