Anyone built/simulated Slone's 11.10 design?

[gain]

was looking at this one and realized i have a lot of the parts for it laying around and want to fab up a PCB for it ... but first i was wondering if anyone could post their opinions and/or experiences with this design. there are several mixed reviews about Mr. Slone's work on this forum and just wanted to make sure this wasn't one of those broken designs that blows up as soon as power is applied!

many thanks!

 

[AndrewT]

Hi,
I just did a search on "slone 11.10" and came up with 364 hits on the Forum.

When you posted this new thread you clicked "I have searched".
Did you tell lies?

 

[gain]

this was the search i tried:

http://www.diyaudio.com/forums/sear...by=lastpost&sortorder=descending&pagenumber=8

which returns 365 hits. of the 364 hits that you report are there any that you would recommend to read to answer my question? some of those threads are like 300+ posts deep.

 

[AndrewT]

are there any that you would recommend to read to answer my question?

no, because Slone appears to have cribbed most of his info from Self and some the bits that are different don't work.

 

[homemodder]

Hi Gain

I dont know that particular design you mention, but Andrew is right, some of his designs can be troublesome. I would suggest to rather search for optimos threads. I have built this and is a very good amp, no hassles with this one.

Drop me a line if you want schematics

Alex