phono preamp

wombil · 19th May 2008, 12:58 PM

Hello All,I am new here and a bit of a dunce with electronics but I have some time and like mucking around.
My question is; "Is there a digram or instructions to build a simple preamp that would go between my turntable and computer out there?'
It would need to be inexpensive,easy to construct, and it should work ok and possibly be powered by 12 volt from a 240/12 volt transformer like the ones used for cordless drills etc. I am ok at soldering ,like a plumber, and don't understand all the technical stuff here but can put things together all right.
All suggestions appreciated thanks,
Wombil.

sreten · 19th May 2008, 04:35 PM

http://sound.westhost.com/project06.htm , 2nd version,

/sreten.

wombil · 21st May 2008, 03:17 AM

Thanks Sreten,Is this project available in a kit form?

peranders · 21st May 2008, 04:26 AM

Please Note: PCBs are available for this project. Click the image for details.
Unless noted otherwise, all PCBs are sold as a bare board, and no components are included.
http://sound.westhost.com/pcb/pp06.htm

If you click at the link you'll have gotten then answer

d to the g · 21st May 2008, 04:32 AM

ps. Plumbing solder is NOT ok to use on circuit boards.

wombil · 21st May 2008, 11:59 AM

Thanks guys,
The plumbing business is a reference to expertise.
I'm not bad at welding too but I don't suppose that helps much either.
Have fun ,
wombil.

19th May 2008, 12:58 PM	#1
wombil diyAudio Member Join Date: May 2008	phono preamp Hello All,I am new here and a bit of a dunce with electronics but I have some time and like mucking around. My question is; "Is there a digram or instructions to build a simple preamp that would go between my turntable and computer out there?' It would need to be inexpensive,easy to construct, and it should work ok and possibly be powered by 12 volt from a 240/12 volt transformer like the ones used for cordless drills etc. I am ok at soldering ,like a plumber, and don't understand all the technical stuff here but can put things together all right. All suggestions appreciated thanks, Wombil.

19th May 2008, 04:35 PM	#2
sreten diyAudio Member Join Date: Nov 2003 Location: Brighton UK	http://sound.westhost.com/project06.htm , 2nd version, /sreten. __________________ There is nothing so practical as a really good theory - Ludwig Boltzmann When your only tool is a hammer, every problem looks like a nail - Abraham Maslow

21st May 2008, 04:26 AM	#4
peranders Electrons are yellow and more is better! diyAudio Member Join Date: Apr 2002 Location: Göteborg, Sweden Blog Entries: 4	Please Note: PCBs are available for this project. Click the image for details. Unless noted otherwise, all PCBs are sold as a bare board, and no components are included. http://sound.westhost.com/pcb/pp06.htm If you click at the link you'll have gotten then answer __________________ /Per-Anders (my first name) or P-A as my friends call me

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new phono stage or old preamp with phono?	flohmann	Analog Line Level	2	2nd October 2008 09:51 PM
Electret mic preamp - will phono preamp work?	darthmullet	Analogue Source	6	12th October 2007 07:32 AM
Phono PreAmp	JTT	Analogue Source	20	15th September 2004 04:24 PM
MC phono preamp	Vortex	Tubes / Valves	29	29th March 2004 10:39 AM
Phono Preamp.	victor	Pass Labs	0	24th October 2001 07:11 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st May 2008, 03:17 AM	#3
wombil diyAudio Member Join Date: May 2008	Thanks Sreten,Is this project available in a kit form?

21st May 2008, 04:32 AM	#5
d to the g diyAudio Member Join Date: Aug 2006 Location: minimalopolis	ps. Plumbing solder is NOT ok to use on circuit boards.

21st May 2008, 11:59 AM	#6
wombil diyAudio Member Join Date: May 2008	Thanks guys, The plumbing business is a reference to expertise. I'm not bad at welding too but I don't suppose that helps much either. Have fun , wombil.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read