I guess that if the relay doesn't click (turn on) the STK is dead so the protection curcuit doesn't turn on the relay to protect the speakers. Or maybe the resistor that's burned was powering the protection curcuit and now it dowesn't power the relay... Anyway send me the manual to check it out
Very thanks for all tips guys.
Actually i have no time to check all these options, but maybe firstly i should check the TP (Test Points to current idle) if there is any voltage. That ll be fast one. If there is voltage the reason should be STK.
Resistor on pic is burned, so i have to replace it. when solder it out, will check if it has connection between two ends. then one option ll be checked.
The scheme is available here: http://m2.xt.pl/grundigfineartsa9000.zip
Actually i have no time to check all these options, but maybe firstly i should check the TP (Test Points to current idle) if there is any voltage. That ll be fast one. If there is voltage the reason should be STK.
Resistor on pic is burned, so i have to replace it. when solder it out, will check if it has connection between two ends. then one option ll be checked.
The scheme is available here: http://m2.xt.pl/grundigfineartsa9000.zip
Hi everybody!
Mat_one, you have written, you have the service manual (I think not only the schematic) for the Grundig A9000. If it is still available plese send it to my E-mail, or plese send a link where from I can download it. I have an A-9000 too, but it hase several errorrs. Without the service manual I can not repair. Only the shematic is not enough, because I have to check -for example the bias- in the power amplifier part.
Thank you for advance!
Best regards
Norbert
Mat_one, you have written, you have the service manual (I think not only the schematic) for the Grundig A9000. If it is still available plese send it to my E-mail, or plese send a link where from I can download it. I have an A-9000 too, but it hase several errorrs. Without the service manual I can not repair. Only the shematic is not enough, because I have to check -for example the bias- in the power amplifier part.
Thank you for advance!
Best regards
Norbert
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- Grundig A-9000 broken :(